|Aug 22, 2012, 08:31 PM|
|Aug 23, 2012, 04:57 PM|
|Aug 24, 2012, 09:29 AM|
I will see if I can find some depron, if not I'll take a few sheets
Theres a good chance of a goblin sighting at the field this weekend
|Aug 27, 2012, 12:10 AM|
Time to move some stuff I'm not flying.
The first to go is the Hobby Lobby Executive Jet with mechanical retracts. I have clocked this over 80mph. It flies great, and glides forever.
My biggest problem with this is even at 80mph, it looks like it should be going so much faster. It's had one rough landing that ripped out the main landing gear once. Not so much a problem with the gear or landing, as it was the wood support that wasn't glued very well at the factory.
There is a small piece of foam near the edge of the aileron that was broke off on that landing. It has been glued back in place. There is also the usual hanger rash associated with foamies.
As indicated on the included battery, I only have 5 flights on this.
Hobby Lobby Executive Jet
HL executive jet retracts.
2 E-flite 3800kv BL420 outrunners
2 Hobby King 40a ECS's
Turnigy 30-40c 3S4500
4 Turnigy 1160a servos (2 for retracts, 1 rudder, 1 elevator)
2 HXT900 servos (ailerons)
I think that's it. I'm well over $325 into this, even if you're using the "on sale" price the plane is now listed at. I'll let this one go for $200. That's just the price of the plane and motors.
Let me know if you want more/different photos.
|Aug 27, 2012, 12:33 AM|
Next in the guillotine is an E-flight Taylorcraft 450.
I purchased this used, and crashed from RCGroups. The previous owner tip-stalled and broke the cowling and wood motor mount. I rebuilt the wood motor mount, and purchased a new cowling. I've flown it two or three times. It flies good, and takes off and lands like a tail dragger.
He broke off the tail section for shipping. There are some small tears in the covering from the repair. There is a section of covering missing where the prior owner probably had his satellite antenna mounted.
The motor had one of the wires break near the motor. I soldered it back. It goes into the motor in a different location on the motor than the other two wires, but it seems to have done the trick.
This flies on a 3S2200ish battery. (not included)
Included in this is:
E-flight Taylorcraft 450
Brushless 450-480 motor. I have no clue what kind, but it swings a 10x8 prop with
authority. I purchased it from "The Don" here on RCG's. He's quality people.
Four Futaba S3114 servos.
"Don's Pentium 30 amp esc"
The servos are a couple years old, but have very few flights on them. They're $15 a piece, so if you want this without the servos, I'll knock off $50, otherwise, I'd like to get $100 for this one. That's essentially the electronics, and the airframe for free.
Oh, i almost forgot. This also has a custom built aluminum prop nut on it. Makes for easy tightening.
|Sep 18, 2012, 12:48 AM|
Selling all my combat stuff in one fell swoop.
3 wings, all in good shape and flyable. Two extremewings and one of Nate T's custom cuts.
No Rx's or batteries.
One wing is ready to fly, and the other two could be very quickly.
3 motors, 3 ESC's, a bag of props, keepers, hubs, horns, connectors, etc.
$100 for everything.
|Sep 19, 2012, 05:03 PM|
PS, I will be selling darn near everything with a prop at the sWARm as well.
I need to clean out the fleet something terrible. I gots some NICE stuff.
|Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale For sale or trade RTF good condition slope slayer||Mr. Innocent||Aircraft - Sailplanes (FS/W)||7||Dec 20, 2005 10:26 AM|
|Motor for a Global Free Style? Please Help...||dklassen||Fuel Plane Talk||6||Oct 26, 2003 07:16 PM|
|3 9x7 props free to a good home||CLARKE||Aircraft - Electric - Airplanes (FS/W)||4||May 25, 2002 09:26 PM|
|Free to good home||gavoss||Aircraft - Electric - Airplanes (FS/W)||2||May 05, 2002 09:49 PM|
|Free to good home.....||pullin-gs||Aircraft - Electric - Airplanes (FS/W)||5||Oct 08, 2001 12:56 PM|