Hi all !
I would like to show you my new combat plane- P 51 Mustang
Wing span: 850mm
Weight: 360gr.
Material: EPP foam
Accu: LiPo 11.1V 1300mAh
Now, few shots from build


First cuts, and grinds.



And ready fuse, wings and empennage to assemble



Eventually, it's ready to fly.


And after painting



Now, few photos from maiden flight.





Mustang flies superbly. It's fast and incredibly agility. I can say that this model inherits flying qualities from original plane
Recently, I had occasion to check out it in Championships of Poland in Electric Simple Aircombat.
Few shots:

Nice paint job.

Hi there. I just got the spitfire, what size motor did you use?
Thanks

I used Emax 2812
http://www.emodel.pl/emax-silnik-cf-2812-p-142

Thanks Szymek

Very nice P-51
You did a nice job of building it with EPP Foam
What did you brace it with?
OD

Thanks, I braced it with this CA. http://www.sklep.modelarnia.pl/index...owy-rzadki-20g
Almost the whole pocket is enough
Plane is very light, it weights only 330g.

Originally Posted by Daz393

Hi there. I just got the spitfire, what size motor did you use?
Thanks

Are we talking about kits, here?

That's a fine looking P-51.

It's kit from this store http://napolskimniebie.pl/
It contains styro elements cuted out by plotter.

Originally Posted by olddog

Very nice P-51
You did a nice job of building it with EPP Foam
What did you brace it with?
OD

olddog,

I'm thinking Szymek may have misunderstood your question.
Website kit description shows part of the contents to be "enhance carbon/glass". I take that to be a combintaion of carbon fiber and fiberglass rods and/or strips for bracing (stiffening).

Szymek,

I started to badger you with a lot of questions about the P11c kit, but I think I'll just order one and see what I get. Thanks for the link to the ESA website.

Hi Mazzepa 1,

I know this kit and i enjoid all them, but i have got a enormous problem the child off us Club To.... See this photo they enjoy to these Marek'kit.

See you soon, Nono28

http://icaar28.blog4ever.com/blog/photo-548331.html

nono28,

Howdy - My experience building with EPP is quite limited, but I could not resist the PZL-P11c kit and ordered one from Marek today.

I watched several videos of Marek's planes flying and was impressed, his designs seem to be very airworthy. I look forward to trying my hand at one.

I may eventually have to try the Jer-2, that thing is just way too cool looking in the air.

Keep 'em flying, boys!

Hi, Mazzepa1,

These aircraft are simple to build, does not hesitate to call a help if you have a problem building (note the double dihedral of your aircraft).
Uses new cutter blade,
to insert the carbon rods cyano fluid
Valid in your plane flies first finish follow.

See you soon, Nono28

Here is full report from build. http://pfmrc.eu/index.php?/topic/30003-p-51-mk-iii/
There is a foto of content of kit at 3# post

Hi Szymek_98_PL,

Really congratulations for your version of the Mustang with glass roof Malcolm, I did not dare to make an aluminum colored paint on the EPP.

Beautiful mastery of the airbrush and more .... What else

See you soon, Nono28

When is a meeting with my Me109?
http://icaar28.blog4ever.com/blog/photos-548331-2.html