|Jan 15, 2013, 02:37 PM|
JetPol GTM 85 polish turbine
The engine is in very good condition. He worked only 5 hours. Recommended review after 25 hours. I always worked on the JET A1 aviation fuel.
The set is all you need:
1x temperature sensor
1x fuel pump AERIOS 7
1x Moduł sterujący ECU
1x Module programming and operatingi GSU with LCD display
1x fuel filter
1x turbine guard
1x alu turbine mount
Other cables and accessories
static thrust: 85N
rotor speed at max power.: 120 000 rpm/min
minimum RPM: 33 000 rpm/min
fuel consumption: 310 g/min
fuel: JET A1 + 3% MOBILE Jet Oil II
dimensions: length: 340mm, diameter: 110mm
images gallery: https://picasaweb.google.com/Dawid.e...COyy-9ba57jYFg
Please do not write in the subject!
|Jan 20, 2013, 09:17 AM|
Pittsburgh Allegheny, Pennsylvania, United States
Joined May 2004
Trader Rating: 19
you can delete this if you like... But it's going to be hard to sell a used engine for the same price as a NEW KingTech K-80. They are $1750, and you can find them on sale for under $1700 once in a while.
Also... since there isn't any support for it in the USA... that will make it hard to sell also.
But... good luck.
|Jan 24, 2013, 09:54 AM|
Joined Jun 2002
My 2 cents worth
|Jan 24, 2013, 03:41 PM|
United States, LA, Baton Rouge
Joined Jan 2005
Trader Rating: 9
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Vario Turbine Lama Heli almost half price new JAKADOFSKY TURBINE ENGINE PJW--LE-SW||Go4it||Aircraft - Fuel - Helis (FS/W)||0||Oct 26, 2012 07:16 AM|
|Sold||3 3/4" 2blade polished aluminum spinner w/nut||scones007||Aircraft - Fuel - Engines and Accessories (FS/W)||2||Mar 21, 2012 10:54 PM|
|Sold||GTM 1/4 Fokker D6 kit w/all options including lozenge||bhouin||Aircraft - Fuel - Airplanes (FS/W)||2||Mar 19, 2012 07:11 PM|
|Help!||Can you get with a 90mm turbine not to exceed 2800 watts 85 to 90 amps of consumption||Ruyman||Electric Ducted Fan Jet Talk||14||Jan 16, 2011 02:59 AM|
|Question||Power system for GTM Fokker D-6||johnmartin||Power Systems||0||Jan 12, 2010 02:23 PM|