SMALL - Telemetry SMALL - Radio
Thread Tools
Old Jul 02, 2013, 04:38 PM
Dennis Everett is online now
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
United States, CA, Ontario
Joined Mar 2002
8,127 Posts
Discussion
bearings ?

Hi , can the bearings in a 1515/2.5D/HF be changed by the user ? or do I have to send it in ? if the later , what is the charge to do so ? thanks , love your products ....Dennis
Dennis Everett is online now Find More Posts by Dennis Everett
Reply With Quote
Sign up now
to remove ads between posts
Old Jul 02, 2013, 05:55 PM
sneu is offline
Find More Posts by sneu
Registered User
sneu's Avatar
United States, CA, San Diego
Joined Dec 1999
7,368 Posts
Quote:
Originally Posted by Dennis Everett View Post
Hi , can the bearings in a 1515/2.5D/HF be changed by the user ? or do I have to send it in ? if the later , what is the charge to do so ? thanks , love your products ....Dennis

If you feel ok with taking the motor apart there is nothing difficult in replacing bearings----just make sure you get the spacers and shims back in the right places and make sure none escape into the gap between the rotor and stator--causes bad things to happen. You need a press of some type and some Locktite.

Steve
sneu is offline Find More Posts by sneu
Reply With Quote
Old Jul 03, 2013, 07:48 PM
Dennis Everett is online now
Find More Posts by Dennis Everett
Registered User
Dennis Everett's Avatar
United States, CA, Ontario
Joined Mar 2002
8,127 Posts
I sent the motor in today , any idea what the turn around time will be ? I should have put a note in the box that I will be out of town and I might not be able to get a hold of .. Dennis
Dennis Everett is online now Find More Posts by Dennis Everett
Reply With Quote
Old Jul 04, 2013, 08:41 AM
sneu is offline
Find More Posts by sneu
Registered User
sneu's Avatar
United States, CA, San Diego
Joined Dec 1999
7,368 Posts
Quote:
Originally Posted by Dennis Everett View Post
I sent the motor in today , any idea what the turn around time will be ? I should have put a note in the box that I will be out of town and I might not be able to get a hold of .. Dennis
It should be done within a week of arriving.

Steve
sneu is offline Find More Posts by sneu
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Bearings: Should the steel balls of bearings be lubricated?. Forgive my ignorance. turnbui Micro Helis 11 Nov 24, 2008 01:10 AM
Wanted Wanted - 5x10x4 Bearings (possibly for trade for my 5x11x5 bearings) StarmanDXE Aircraft - General - Miscellaneous (FS/W) 0 Jul 18, 2007 12:25 PM
Wanted Turbine bearings, or any high speed bearings ronmeister Aircraft - Fuel - Jets (FS/W) 3 Feb 14, 2007 10:38 PM
Discussion Ball Bearings vs. Liquid Bearings in aeroplanes z-matrix DIY Electronics 3 Jan 05, 2006 12:48 AM
PJS 800E, bad bearings, replace bearings or whole motor? dalbert02 Power Systems 1 Nov 07, 2005 06:15 PM