Originally Posted by rampa202

When I select "get" in the android app, this is what I see. So there is data in the FC parameters, but get doesn't work on the pc's I tried. Since I got the same results with two different computers it has to a conflict with

1) both of my usb to serial adapters - seems unlikely
2) conflict with windows 7 64bit - more likely

The two computers I tested this on are a desktop and a notebook. They are completely different in hardware and installed software except for the operating system - both win7 64bit.

Can anyone here running windows 7 64bit verify that the "get" function works on their pc?

Russ

Hi Russ

I will try it tomorrow sometime and let you know.

Rob

See hobbyking is selling this ys x6 for $1030 not that i will buy their shipping time is way to long for my liking with such exspensive item.

Where can I find the ys-x6 kit in the USA?

Thanks Rob

w2hef - http://gothelirc.com/shopdisplayprod...YS+Controllers

Russ

Originally Posted by w2hef

Where can I find the ys-x6 kit in the USA?

Here is the website and Email of local distributor:
www.gothelirc.com
sales@gothelirc.com

Originally Posted by Andre6553

See hobbyking is selling this ys x6 for $1030 not that i will buy their shipping time is way to long for my liking with such exspensive item.

Hi Andre....I have one waiting with your name written on it plus if you hurry you stand a chance of winning the 16 waypoints in the competition that Zero UAV are running, and if you load a video, you can buy the data link for $99+shipping costs, instead of the $199. Competition ends 10 October. http://www.rcgroups.com/forums/showthread.php?t=1703032

Rob

Originally Posted by robone

Hi Andre....I have one waiting with your name written on it plus if you hurry you stand a chance of winning the 16 waypoints in the competition that Zero UAV are running, and if you load a video, you can buy the data link for $99+shipping costs, instead of the $199. Competition ends 10 October. http://www.rcgroups.com/forums/showthread.php?t=1703032

Rob

problem is rob i dont own the unit yet so i cant load any videos.is the competition also for non owners.

Hello.

There is a new firmware 20120815.

What are the changes?

Cheers
Jose

Originally Posted by RCI

Hello.

There is a new firmware 20120815.

What are the changes?

Cheers
Jose

Hi Jose

I was just about to load the FW from the 20120810 and now there is another one.

It is too late to speak to the Zero Team to find out.

Rob

Originally Posted by RCI

Hello.

There is a new firmware 20120815.

What are the changes?

Cheers
Jose

A release note with firmware revision history and feature descriptions would be nice..

But as I mentioned earlier. I am not touching any firmware updates until they have improved PTZ features. Anything else is just "unimportant fluff" at the moment and puts to high a risk on the copter each time you update.

ZeroUAV: I would very much like some confirmation that improved PTZ features are actively being worked on, and not just a "will be added in the future" type of deal. At the moment the PTZ control is a joke, and not suitable for anything put playing around with.

CAN SOME TELL ME where can FIND THE BOTTON FOR ACTIVATING CAREFREE ON APPLE GCS

Originally Posted by rampa202

When I select "get" in the android app, this is what I see. So there is data in the FC parameters, but get doesn't work on the pc's I tried. Since I got the same results with two different computers it has to a conflict with

1) both of my usb to serial adapters - seems unlikely
2) conflict with windows 7 64bit - more likely

The two computers I tested this on are a desktop and a notebook. They are completely different in hardware and installed software except for the operating system - both win7 64bit.

Can anyone here running windows 7 64bit verify that the "get" function works on their pc?

Russ

Hi Russ

Loaded up the new FW V1.2 (20120815). Maybe I should have tried before with the previous FW. But anyway, on the Laptop (win 7 64bit) if I click Parameters and then Get, it shows all the parameters.

Extended parameters shows all 0's as it has always done.

Rob

Originally Posted by hemanthtguru

CAN SOME TELL ME where can FIND THE BOTTON FOR ACTIVATING CAREFREE ON APPLE GCS

Hi Hemanth.

I am also trying to find that button, on the Android and PC GCS. When I find it, I will let you know.

By the way, did you get your motors?

Rob

SOLVED.. Thanks Cryhavoc.. SORRY to plug the flow - confusion over the manual words, and the software had me confused! time to go fly...

Hi All. Having a few issues in setting the 3 way switching. I have chl 5 / 6 setup for changing my flight modes. I am able to get the software to show (Auto hover, Auto navigate, and return home) on my 6 position when activated, but on my 5 switch I cannot get the ground control to show anything in position 1 or 2 other than "manual" Position one I am getting no red blink, position 2 I am getting blue blinking, position 3 activates the channel 6 3 way switch.
I have tried adjusting my end points, but cannot seem to get the 2 settings out of "manual" on the 5 switch. Any suggestions?
Using Futaba T8FG with SBUS. ( sa and se as my 3 ways)
Thanks
Jeff

Originally Posted by robone

Hi Russ

Loaded up the new FW V1.2 (20120815). Maybe I should have tried before with the previous FW. But anyway, on the Laptop (win 7 64bit) if I click Parameters and then Get, it shows all the parameters.

Extended parameters shows all 0's as it has always done.

Rob

Thanks so much Rob. I'll try the newest firmware. I assume you are also using some sort of USB to serial converter.

Russ