My other jet project: F9 Panther
Plan: Ziroli
Engine: K-80

F9 Panther original photos..

I am working on the plan...

I plan to enlarge the plan by 10%. Is it sufficient/problem for K-80E (8kg thrust) ?

Cem

I started fuselage.

I bought a transmitter to use in this model.

Photos..

First, I make photocopy of the drawings. Next, I place the relevant parts/sheets (the drawing must be facing down) over the plywood/balsa. In Turkish, we say "like kissing".

Now, the important part :

You must make a little training on another sample before application ...

You must stiffly press the copy over the plywood with one hand while making the transfer to avoid any possible movement/distortion. You take a piece of cloth and wet it with "cellulosic thinner" and strongly rub it over the drawing lines which will make the transfer. The thinner should be the right amount to make a successful transfer. This is why you must make a few trials. You must DEFINITELY do this in a very well ventilated room.

Originally Posted by czirh

You must DEFINITELY do this in a very well ventilated room.

Come on! Now you are taking all the fun out of working with chemicals!

Originally Posted by thenodemaster

come on! Now you are taking all the fun out of working with chemicals!

:-))

Fuselage formers..

Today Photos..

Looking really good!

Originally Posted by thenodemaster

Looking really good!

Thank you, thenodemaster..

Fuselage photos...