So with the latest firmware we all have four waypoints now?

Am I understanding this correctly?

Steve

Originally Posted by saabguyspg

So with the latest firmware we all have four waypoints now?

Am I understanding this correctly?

Steve

I believed the base version always had 4 waypoints at least that's what I have

Me too, 4

Originally Posted by saabguyspg

So with the latest firmware we all have four waypoints now?

Am I understanding this correctly?

Steve

Yes, 4.

Hi I am very happy with my controller YS-X6, I have some vibration when I fly in GPS that I have to solve.

Here I put a video, "follow me" funccion

Follow Me test with my hexacopter Zero Tech YS-X6 (4 min 58 sec)

Originally Posted by jeanclaude

Hi I am very happy with my controller YS-X6, I have some vibration when I fly in GPS that I have to solve.

Here I put a video, "follow me" funccion

http://www.youtube.com/watch?v=YgH-joTNPIs

What happened at 3:30 ?

Originally Posted by saabguyspg

So with the latest firmware we all have four waypoints now?

Am I understanding this correctly?

Steve

Originally Posted by xrotor_rg686

I believed the base version always had 4 waypoints at least that's what I have

Originally Posted by Frank.T

Me too, 4

Originally Posted by FlyingMcCoy

What happened at 3:30 ?

Hey guys, yeah, YS-X6 is always with 4waypoints as basic version. It can be upgraded to 16waypoints/50waypoints/128waypoints too.

FlyingMcCoy, how we hope you were staying here at post#66 of Activity Thread: http://www.rcgroups.com/forums/showthread.php?t=1703032
Haha, but another chance is coming close to you there, go there and check, you may also get a chance to stay on#126....

Originally Posted by jeanclaude

Hi I am very happy with my controller YS-X6, I have some vibration when I fly in GPS that I have to solve.

Here I put a video, "follow me" funccion

http://www.youtube.com/watch?v=YgH-joTNPIs

Hi jeanclaude, try to post your video here: http://www.rcgroups.com/forums/showthread.php?t=1703032

You may get a chance to win a reward, hurry action

What happened at 3:30 ?

This is normal The hexacopter automatically rotates the front, looking for mobile gps signal . The first time I scared

Hi jeanclaude, try to post your video here: http://www.rcgroups.com/forums/showthread.php?t=1703032

You may get a chance to win a reward, hurry action

Thanks, I've put

Sorry for my english!

Can someone tell me why was the competition moved to here http://www.rcgroups.com/forums/showthread.php?t=1703032 ? That is where all the videos are being posted.

Who ever moved it, it is in the wrong place

Rob

Probably because ZeroUAV isn't a RCG sponsor.

Hi guys,

Is there really anyone using YS successfully in heavy lift setup? I have tested now around 100 flights and i'm having two constant problems. First i cannot get rid of small vibration which is only noticeable in video watched in full screen afterwards. I have tried with 6 different well balanced props, rebalanced motors couple of times, all balanced and balanced again with large variety of different parameters and it's always there. With WKM i don't get any vibration at all so it has to be related to YS somehow. It's kind of very small roll direction oscillation which is most noticeable in corners in video.

My P/R sensitivity values are now around 70-80, if i go higher it oscillates and lower it's too sensitive. Atti is now 25, if go higher it oscillates even in 70/P/R, low end i don't know it's already very low. How low it is safe to go with atti values? Motion compensation i have tried in range from 40 to 190 but not much difference, oscillates when very high but same small vibration is there when it's very low.

Other thing is i get sudden yaw drifts, i've got them from the beginning almost in every flight. Recalibrated compass many many times and really don't know why it drifts, even in dead calm. I have rechecked motors are straight few times with laser spirit and i only can tell they are very straight. Also tried to tilt the motors to help yaw 3 degrees but it didn't help. Possibly might be related low ATTI value i need to use?

Is there really anyone flying YS successfully in bigger (over 5kg) setups? Do i need to go back to WKM and put YS back to smaller frame or is it possible to get this setup flying without vibrations? In every other ways i really like the YS system much over WKM and i really like to use it but looks like i just can't get it right there. I really appreciate all suggestions that might be helpful.

Here is video showing yaw drift and also vibration:

yaw drift (0 min 13 sec)

I do. 5Kg and 14Kg with prof. camera.

I even use the standard settings and they work for me.

Did you use only double-sided tape under the IMU (i did).

Did you place your antenna(s) and receiver/transmitter far away from the IMU

//Frank

Originally Posted by robone

Can someone tell me why was the competition moved to here http://www.rcgroups.com/forums/showthread.php?t=1703032 ? That is where all the videos are being posted.

Who ever moved it, it is in the wrong place

Rob

Maybe finding it is a part of the competition
I don't mind, you?

//Frank

Well, i don't know whats far enough to avoid emi from Tx/Rx. Here is pictures of my imu mounting, IMU is placed under battery tray and PDB is quite close 22mm under IMU. Imu is mounted on 6mm vibration absorbing gel sheet.