|Nov 08, 2010, 12:40 PM|
-Correx Mig-7 Scratch build-
Howzit to all correx, corroplast and plastic slope fliers.
This thread should give you an idea of how we build the Correx Mig-7 and the modifications made.
Thanx to Dave West for the original design. For the original free plans, please go to his page at http://westaero.wingedshadow.com ........OR READ FURTHER.......
Big THANX to FB for redrawing the plan with all our mods built in!.......and for updating, refer below for the free plans!
Brian, thanx for the previous plan!
I have been pushed into a quick build because I crashed my plane yesterday and have a national slope event comming up in three weeks. So, lets see how we manage.
Please feel free to ask questions. Even better, please tell us how or what you did to improve an already very easy, great slope flier! We are by no means the best builders with correx, as it is known in Port Elizabeth, South Africa, but have built a few. We started with the original size, for glow .25, but for the slope. Since then, we have built a 2m, Saito Fa 1.25 powered Mig with u/c. The electric Migs are also high on our list of must haves!
Here are a few pics of what we have built. These should help you decide to follow this thread or move onto composites.
45 Amp CC esc
2200 mAh, 25C, 3cell
That will get you endless nose up!
You will have to do a bit of reserch to find the equivalent as some of the items are discontinued....but here is a good start for the motor if you dont want to go AXI!
My setup is well powered, but you can either go bigger on the model or smaller on the power train!
HXT 900 servos will also do the job. I have been flying my electric for seven years now, so "those days" when I built it, there were no cheaper alternatives!
Please shout if you need further assistance!!
#Torque Rod Short Videos..... http://www.rcgroups.com/forums/showt...335350&page=74
More Mig fun!
All the reasons why I will always have at least two Migs in my hanger!!
Video from AFC Hermanus 2012.
On the way home from AFC Hermanus 2012, we stoped in Wilderness.
Who says you can't do VTPR with a WarBird built from Correx?
Watch some AWESOME flying in this cool clip!!
Thanx Bakkie for the Movie!!
Here is having some Giant Scale Fun at Hermanus 2011 with Ulrich's 3000mm span Mig and a few GoPro's!
Another cool clip!
Just having some fun off the road!
Side Arm Launch ;-)
FilesView all Files in thread
|Nov 08, 2010, 01:41 PM|
Start by dl the free plans and print in A4. If you can plot to scale, even better. Take your file on stick to your local print/copy shop and get them to enlarge to the scale you want, cheep-cheep! I am going for a 1320mm span. I have built smaller and larger and find this size best. Starting with the fuzz. Once enlarged, cut all your templates out. Place these on 3mm ply, template and cut out. Remember, we are building a slopie, so we will be using 3mm correx for the fuzz, tail feathers and ailerons, 2mm for the wing. Fuzz formers will be 3mm ply, spar 4mm ply. It does not have to be as per drawing as this was for a powered plane.
|Nov 08, 2010, 01:42 PM|
One more pic to add
|Nov 08, 2010, 02:08 PM|
The first mod comes on formers F2 and F5. Once you have templated onto your plywood, add on 4mm extra on the bottom. This helps with a more positive wing location.
|Nov 08, 2010, 03:56 PM|
Well done Sean and good luck with your building Blog. I know we are in good hands.
My name is Markus and have build flown and crashed a couple Mig’s with Sean. In the moment I have a power and a Slopie Mig in my hanger and they are by far my most favorite birds.
We are also known as team Mig.
|Nov 08, 2010, 09:41 PM|
Joined Nov 2008
Here is my attempts
Those plans are great, and you can use whatever materials you want.
|Nov 09, 2010, 06:24 AM|
|Nov 09, 2010, 07:02 AM|
I recently went to a slope event and was left out of the most fun flying because I didn't have a a PSSer. Came home and decided to scratch out a Mig 3, partly because of the pics posted by you SA guys.
Thanks for sharing your build log, I will be subscribed and following for inspiration. I haven't put wire to foam yet since I promised myself I would learn CAD lofting on this project which has been a project in itself. I may just try the correx method to satisfy the need to be at the bench rather than at the desk for now.
|Nov 09, 2010, 09:46 AM|
|Nov 09, 2010, 09:55 AM|
You must bring your fuzz over so I can fit my wing. That will be Jim sorted. You however.......
I've cut out the formers, glued F5 to F5A and FB and colored in the "headrest" black.
|Nov 09, 2010, 12:04 PM|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Build Log first scratch-build! :D||ClippedWings78||Foamies (Scratchbuilt)||7||Nov 01, 2010 08:45 PM|
|Build Log MiG-15 in 1/10th scale for PSS: A Scratch-Build||John Rood||Slope||4||Sep 17, 2010 09:41 PM|