HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by The Don, who may elect to delete unwanted replies.
Old Nov 20, 2010, 12:49 AM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
Discussion
New Products and Website Inventory Updates

This thread is to keep everyone up to date on new products added to the website or inventory status updates.

Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Sign up now
to remove ads between posts
Old Nov 20, 2010, 12:53 AM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
Two new products added to the website:

1) EMAX 8 gram servos. These are the servos I use in my build threads. Now you can buy the same servo as you know it will work!
http://www.donsrc.com/cart/index.php...&productId=110


2) 50mm EDF fan units with 6 blade rotor. This fan is used by some in the new Jpower 50mm EDF jets. This fan can be used as a replacement for the stock fan unit but needs the rotor drilled out.
http://www.donsrc.com/cart/index.php...&productId=109


These were added a few weeks ago:

3) Servo extensions. I now am carrying servo extensions in various lengths. Another item I use in my builds, now you can get the same parts I use as well.
http://www.donsrc.com/cart/index.php...ewCat&catId=15




Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Nov 24, 2010, 07:02 PM
Trash Hauler emeritus
herk1's Avatar
Maryland, USA
Joined Oct 2006
1,703 Posts
Would be nice if you offered the metal gear version of that servo!...if it is as decent a servo as the plastic-geared one, that is. It's not so easy to find decent low-cost metal-gear servos.

Nice to see that the servo extensions you have are in the 22 gauge, not 32 gauge...I worry about using the thin stuff...especially with the ESC-to-RX wire.

However: the servo extension that I probably use the most after 6-inch is 3-inch. Maybe 3-inch even more than 6-inch. And "you know who" doesn't carry those either. So I pay through the nose for them from Horizon.
herk1 is offline Find More Posts by herk1
Reply With Quote
Old Dec 06, 2010, 10:17 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
Many of you have been asking me about 70mm EDF power systems for some time. I have decided to start carrying the RCLander Metal EDF motor/fan units. I have used one and was very impressed with the units and have a few more 70mm EDFS I want to try out. So in a few days I will have in stock the new version of the RCLander Dynamic Power Series Metal EDF unit. Specifically I have ordered the 68mm verison with the 3580KV motor for 4S use.

Here is a link to their test video:
RCLander New Dynamic Power Series 68mm EDF video.wmv (2 min 8 sec)


Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 13, 2010, 10:23 PM
Registered User
Joined Mar 2009
11 Posts
order question

don i have an order to place for 2 4800 kv motors do I need to order 40 or 60 amp esc's to go with these motors i will be running them in hyperfans thanks if the 68mm lander fans have arrived i will order one also will it need the 85 amp esc and will you have it thanks gary [toronto]
the big g is offline Find More Posts by the big g
Reply With Quote
Old Dec 13, 2010, 10:35 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
The 4800s on 4S in the Hyperflow fan will be OK on 40 amp ESCs. The Lander fans have cleared US customs so hopefully will come in tomorrow but the weather here in Ohio is nasty so may not arrive until Wednesday. The biggest ESC I have now is 60, I will be getting 80 amp ESCs in about two weeks.

Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 14, 2010, 05:10 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
The new dynamic 68mm RC Lander fan units have arrived!!!!
http://www.donsrc.com/cart/index.php...&productId=111
The Don is online now Find More Posts by The Don
RCG Plus Member
Last edited by The Don; Dec 14, 2010 at 05:43 PM.
Reply With Quote
Old Dec 14, 2010, 10:02 PM
Registered User
Dyess AFB
Joined Apr 2009
697 Posts
Hurry up and test this thing, I'm in the market for some more power for my Mig-15
Matt Howard is offline Find More Posts by Matt Howard
Reply With Quote
Old Dec 14, 2010, 10:48 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
A quick test was about 800 watts on 4S I need to get the battery charged will resume tomorrow.

Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 15, 2010, 05:13 PM
Registered User
San Jose, CA
Joined Oct 2003
114 Posts
60mm edf units

Hi Don,
When are 60mm edf units expected in stock? Thanks.
yesbee1 is offline Find More Posts by yesbee1
Reply With Quote
Old Dec 15, 2010, 05:19 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
Middle to end of next week.

Don
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 15, 2010, 09:34 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
Quote:
Originally Posted by Matt Howard View Post
Hurry up and test this thing, I'm in the market for some more power for my Mig-15
Here is what I tested using a Pentium 60 amp ESC.

Low Timing:
733 watts, 14.58 volts, 50.3 amps

High Timing:
890 watts, 14.50 volts, 61.4 amps


Do not use Medium timing, it made the motor stutter mid throttle.


RCLander recommends the higher timing for the dynamic series.
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 16, 2010, 05:45 PM
Registered User
Dyess AFB
Joined Apr 2009
697 Posts
Thanks for the info Don. What battery are you planning on running in you Mig with this fan unit? I have some 3600 4S packs which I think might be too heavy and some 2650 4S 40C packs but I'm not sure the fligth time on those with this unit.
Matt Howard is offline Find More Posts by Matt Howard
Reply With Quote
Old Dec 16, 2010, 08:51 PM
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,201 Posts
I was going to go for a 4S4000 as that what I had in my RCLander Panther last year.
The Don is online now Find More Posts by The Don
RCG Plus Member
Old Dec 16, 2010, 09:22 PM
Registered User
Dyess AFB
Joined Apr 2009
697 Posts
Well I've got to finish up my christmas shopping and if I have enough funds left over I'll get one of the lander units, probably in a week or so. I'll definetly have to get a stiffer spring for the front retract, the stock one is pretty much bottomed out with a 2200 4S pack in it, LOL.
Matt Howard is offline Find More Posts by Matt Howard
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product New Products / Stock Arrivals / Product Updates thread Extreme_RC Extreme RC AUSTRALIA 6 Oct 05, 2011 02:53 AM
Discussion KP Website Update - KP10e and new Products harvey-boy Motorcycles 4 Jan 27, 2010 07:29 AM
Discussion New Website, New Products the_canuck Product Announcements 0 Mar 01, 2009 04:29 PM
Website Updated and New Products Soon mapmanufacturers Product Announcements 0 Aug 06, 2005 01:07 PM
iRate lipoly Inventory Updates frederm2002 Batteries and Chargers 11 Feb 19, 2004 01:28 PM