|Feb 08, 2013, 04:56 AM|
Joined Feb 2013
Slow Servo Moves
I have an Eagle Tree Guardian 2D/3D and installed in my Graupner Rookie QR. All servos are in the right direction. The gain Cannel is not connect because I lack a channel for it. Mode Channel is connected. In 2D mode the servos are moving in the right direction, but very slowly, when I move the plane around his axes. If The Guardian is off, Servos move is normaly speed
Two ailerons are connected with a Y-cable. The software on the PC, I drop everything to factory settings. I've seen your video tutorial. Here, all the servos move much faster. What did I do wrong, or is it the Guardian? The controls on the Guardian is turned to maximum. Also, it changes nothing.
|Feb 11, 2013, 03:34 PM|
Hi, if you connect the Guardian to the PC, does the "AHI" display move very rapidly as you move the guardian around? Or, does it move very slowly and lag the movement of the guardian?
|Feb 14, 2013, 03:29 PM|
Hi, we have a couple more questions for you, if you don't mind:
• Could you describe the results from when you move the sticks in 2D Mode, 3D Mode and Disabled? Do the servos move quickly with the stick movements, or do they lag and catch up? Is the movement smooth, or jerky?
• When you pitch/roll the airplane while in 2D Mode without touching the control sticks, you say that the servos move “slowly.” Could you please elaborate? Does it seem like the servos are not moving as far, or they are going slowly and then catching up? Would you be able to post a short youtube video of the behavior?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Servos slow to return||thintz||Micro Helis||5||Jan 10, 2013 02:15 PM|
|Help!||Moving the throttle moves the servos !||flylowfast||Radios||1||Jul 24, 2012 07:33 PM|
|Help!||when i move the aileron stick,my ele servos move slowly and twitch||guitaramp68||Radios||14||Aug 07, 2009 09:21 PM|
|Discussion||moving CX2 an a direction - why does it only move for a short while , then slow down?||vwattindc||Coaxial Helicopters||39||Sep 10, 2008 02:59 AM|
|Throttle servo moves when elevator servo is moved||chris8105||Fuel Plane Talk||22||Jan 10, 2007 03:53 PM|