|Dec 05, 2012, 09:07 PM|
This Old Boat
This thread will be an occasional photo documentary on the restoration of an old International A Class boat. In 1922, the class was created by the English magazine, Yachting Monthly using the 5.5 meter measurement rule adapted for model yachts. The rule is a relationship of waterline to sail area with draft, displacement, average free board and quarter beam measurements factored in to equal 1000 mm (39.37 inches). The result is a yacht that can vary in size from 58 to over 88 inches in length with displacements between 25 to 60 lbs. and carry 1500 to over 1800 square inches of sail area.
To begin the story, I was clued in on an A boat that was briefly discussed in a thread here on RCG. Several participants speculated on what it was so I followed the link to the listing on RCU. I contacted the owner, agreed on a price and by the weekend I was the new owner of A 422.
|Dec 05, 2012, 10:06 PM|
United States, MA, Wenham
Joined Jan 2007
Man, she looks nearly there already!
Single panel sails... meh.
What else could she possibly need? Electronics?
|Dec 06, 2012, 11:28 AM|
Yes, it looks good as it is but there are some issues that I want to address.
1. The boat was painted with Hobbypoxy paint. Nice, but I prefer the vintage look of natural wood above the waterline. So, it's coming off.
2. As it is a 50# boat I wanted to remove the keel weight (35#) to make it easier to maneuver so I've done that. I'll rework the attachment method so I can move the boat around without too much fuss.
3.The winch is an old 6V bang bang from Vortex Engineering. I plan to replace it with a Servo City gear box winch. An RMG 380 is nice but not necessary.
4. The sheeting arrangement used travelers on both sails. It probably worked ok with the Vortex winch but the jury is still out on that one.
5. The rudder skeg is broken and needs repair. I could saw it off and install a balanced rudder but that would detract the look from original. So, it gets fixed and reinforced.
6. I believe the mast and main boom are original to the boat but the jib boom is a replacement.
7. There are lots of Fisher fittings that I will re-use plus I have a good stash of the same. Nice, shiny Pekabe fittings are ok but I want to maintain the vintage look.
8. The sails are a paneled suit from Rod Carr and undersize. I believe they may measure in as a "B" suit and will be replaced with a nice proper sized suit. I'll probably use dacron as Tri-spi is too modern for the vintage period and Egyptian cotton doesn't last.
9. The deck was replaced with doorskin at some time in its life and was glued on with resorcinol adhesive. I'll leave it on but add some features to make it more attractive.
I'll post more pictures of my progress soon.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||historical old tether boats from this area......||reedbanjo||Racing Boats - Internal Combustion||4||Aug 16, 2012 10:41 PM|
|Discussion||New to boats with a old boat||Torqueranger||Racing Boats - Electric||43||Jun 19, 2012 12:01 AM|
|Alert||Neat old boat for someone.............||scorpion1||Racing Boats - Electric||2||Apr 15, 2012 12:11 AM|
|Help!||this old speed boat||Jerome Morris||Dock Talk||30||Feb 16, 2010 12:45 PM|