|Dec 17, 2012, 09:15 AM|
Joined Oct 2011
CALIDUS 50E ---Made In China! For Sale
2,Rotor Blade diameter:1800-2000mm
5,Power Motor:3.5KG E
8,Preratation ESC:4S 40A
9,Battery:4S 5000MAH,5s 4000MAH&2-3S800MAH,6S 32500MAH&2-3S800MAH
10,Servo:10KG 2 for rotorhead,5KG 1 for rudder and front wheel
Below parts is included:
1,Fuselage(fiberglass cowl,pvc canopy,wood&skin&painted tail,wood and Aluminum skeleton,Aluminum&painted landing gear,fiberglass wheel cowl)
2,Basla wood&fiberglass blades (a pair)
3,scale rotor head(anodized Aluminum,prerotation gear and prerotation motor included)
4,Two 3" PU wheels,one 2.25" front PU wheel and one tail foam wheel(prevent tail abrading)
5,two wire push-pull rods(for rotor head) and four cables(for front wheel and tail rudder)
6,One scale spinner(painted)
Below parts is not included:
1,Two 10KG servos for rotor head one 5kg servo for wheel and rudder.
2,The max thrust can arrived 3.5KG motor is OK,I can provide the High Quanlity & Reasonable Price's motor and ESC ,prerotation ESC is 4s 40A.
3,The battery is 4s-6s LIPO 5000MAH or more volume,4s is the best for the autogyro-rc.whatever the "S",the weight must be 500g or more to Distribution center of gravity.My calidus is scale,not the same as the gyro-one,so in my calidus the battery is placed at the front to adjust the CG,too light bettery is dangerous for flight.But take easy,there will be the CG hole at my calidus skeleton to check.
website is digging!
Video is coming,All the video key is:louis
1,Calidus LOW SPEED TAKING OFF AND LANDING PART1
2,Calidus LOW SPEED TAKING OFF AND LANDING PART2
3,AERO DRAGON CALIDUS LOW SPEED AND HIGH ANGLE FLY
4,AERO DRAGON CALIDUS TAKE OFF AND LANDING PRACTICE
5,AERO DRAGON CALIDUS POWER OFF LANDING part 1
6,AERO DRAGON CALIDUS POWER OFF LANDING part 2
More info please contact:firstname.lastname@example.org,LOUIS HU
|Dec 17, 2012, 05:56 PM|
That's one of the best models I have seen, if it's made in China then it should be pretty cheap.
|Dec 19, 2012, 04:04 AM|
Maa Wii Oww ?
On a serious note this chap may just not have the funds to get started? He may need orders to get the ball rolling. I am with Joe on this, we really do need to see a video of it performing in the air please?
No point any off us throwing money at you without proof that it is a flier.
Though it may be a scam I still think it is one of the best gyros I have seen.
|Dec 19, 2012, 10:51 AM|
Good morning Bill. I did a bunch of searching on this one. The website aerodragonrc.com is gone. There are still some old videos of its predecessor flying off a dead end street but nothing new. There are pics of the model in full production. Unless we hear from Lous again with pertinent verifiable info, I think this one is dead.
What about it Louis? There are people here that would buy the model if given a chance!
|Dec 19, 2012, 01:02 PM|
Louis you must get back with more info and video but not from the street
|Thread||Thread Starter||Forum||Replies||Last Post|
|Question Made in…China?||CraigVMN||Multirotor Talk||3||Oct 01, 2012 01:30 AM|
|Yippee! So what do you want made in China?||Smashed_Toad||Parkflyers||4||Feb 08, 2005 10:44 PM|
|Airplane---Made in China||graceying||Vendor Talk||14||Dec 17, 2004 09:12 PM|
|Pics of a F5b made in China||Zhaokun Deng||Electric Sailplanes||20||Oct 23, 2004 01:36 PM|
|Are all lipolys made in china?||Joe Ford||Batteries and Chargers||3||Mar 30, 2004 09:26 AM|