HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Apr 21, 2014, 12:34 PM
wait, there was a tree ?!?
moray's Avatar
Switzerland, ZH, Oberengstringen
Joined Jun 2012
22 Posts
Discussion
3d printed Tricopter, based on rcexplorer.se design

I wanted to share my 3d printed tricopter based on Dave's design.

The body is 3d printed and reinforced with some 1.5mm gfk plates. The tri is designed for night flying, it has 48 leds and 3 flashers, only consumes 13mah/min. Flightime ~ 7min.

Setup :
Acro Naze32
Bluetooth Module for field tuning via smartphone
2212-980kv spinning 9x5 or 10x5 props
Hitec HS-82mg
FrSky D4R RX
20a flashed SimonK esc
3s 1300mah Lipo
749g auw incl. Lipo


3d Printed Tri Copter, Overview & Tuning Flights (3 min 30 sec)
moray is online now Find More Posts by moray
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale RCExplorer style Tricopter w/Multiwii SE 2.0 & Bluetooth Ceradinimp Aircraft - Electric - Multirotor (FS/W) 2 Dec 17, 2013 06:31 AM
For Sale New rcexplorer Tricopter with 3D printed frame fdaremi Aircraft - Electric - Multirotor (FS/W) 4 Aug 03, 2013 12:57 PM
Discussion Ardupilot Mega 2.0 on rcexplorer.se Tricopter V2.5 Manfet Multirotor Talk 0 May 14, 2012 03:00 AM
Help! Help with tricopter from rcexplorer.se JoseOlcese Multirotor Talk 4 Feb 19, 2012 06:46 AM
Discussion Which copter body on an rcexplorer.se tricopter? David Jenkins Multirotor Talk 2 Nov 26, 2011 02:53 PM