My pleasure Gary!

Bought one!

Hacker A30-14L
Hacker X-55-SB Pro
HS-65MG x 4
Xoar Prop 12x7
(4s set-up)

Stoked!!
My first 3dhs and from the looks it wont be my last.

Any shoehorn a ICE 75 in this plane? It's what I have and I think its way too big for the motor box/cowl.

Originally Posted by Wretcho

Bought one!

Hacker A30-14L
Hacker X-55-SB Pro
HS-65MG x 4
Xoar Prop 12x7
(4s set-up)

Stoked!!
My first 3dhs and from the looks it wont be my last.

Maiden flight on the weekend! Went really well

Ended up with 123mm CoG, running 2650 4s. Almost no more room to move the lipo further back as it's almost on the wing spar.
Punched 9 flights through it, 8 of those just to tune the airframe and twist some mix magic. Best plane I've ever flown or owned, can't take this silly grin off my face

Airframe went together extremely well apart from the tail landing gear, the wire was broken in the box. Not a huge issue, just bent another one up from some spare spring steel i had.

Very happy with it, preforming maneuvers with it already which I've been dreaming of. This plane will be a massive learning curve, can't wait!

Congrats!

...next time you order from ADC remind me about the tailwheel wire and I'll include a new assembly.

Rob

I assure you that will be fairly soon lol, you guys rock!

couldn't pass this one up with the 12%off coupon, looking forwards to a true pattern plane

What are the most reliable, accurate Digital MG servos that are used on the 47" Osiris?

I run Savox 0256mg in mine. I had bought them for another plane. I am very happy with these little servos.

I'm running the 5065 and love them, only 7 flights on this so far, but over 100 on my laser and they are very good

Originally Posted by Inverted-I-Fly

I'm running the 5065 and love them, only 7 flights on this so far, but over 100 on my laser and they are very good

I was thinking 5065's, but I have never used them before, and reviews are horrible. Very odd for Hi-Tec 65's of any kind.

I have more 5065mg's than I care to count...great servo.

Originally Posted by going4speed

I have more 5065mg's than I care to count...great servo.

What voltage do you power them at?

5.1 - 6.0v ?

6v always.

Originally Posted by johnnyrocco123

What voltage do you power them at?

5.1 - 6.0v ?

Settting up my control, and I was wondering what I should set to.......

Motor timing

PWM rate


Using the Omega 130g motor.