HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Oct 06, 2012, 10:32 AM
Texas Buzzard
Texas Buzzard's Avatar
McAllen,Texas
Joined Mar 2004
1,034 Posts
Discussion
Ducted Fan & Velocity of the air in tailpipe.

I used to watch F-84s takeoff carrying two 500 lb boms + 6 HVAR rockets fully fueled. They were able to takeoff. ( in the 1950s)

Having some experience in free flight and controline I marveled at how that jet engine could produce the needed thrust to make all that mass accelerate. I envisioned all the gasses escaping from the tailpipe and wondered what mass was being driven throught that tailepipe.

I knew some basic physics, i.e., Newtons 3rd Law, and it seemed that the very low density of the escaping gases would have to have a great velocity in order to produce the significant thrust needed.

If we were to compare the Momentum of the exhaust gases to the momentum of the airplane at first it seems that they would be equivalent to one another..... friction aside.

I have an electric ducted fan rated at 1.8 pounds of thrust by the manufactuer.
I know the density of air is 1.29 grams per liter.

What would the exaust velocity of the air have to be to produce 1.8 pounds of thrust?

You might want to rewrite this question......... ??? Please do not tell me to buy an anemometer.....ha, ha.
Texas Buzzard is offline Find More Posts by Texas Buzzard
Reply With Quote
Sign up now
to remove ads between posts
Old Oct 06, 2012, 11:05 AM
"...certainty is absurd."
kcaldwel's Avatar
Joined Jan 2007
3,632 Posts
Search function:

http://www.rcgroups.com/forums/showthread.php?t=1332150

EDFs are not the same as turbojets. (Turbojets add to the efflux mass through creating added gas by combustion and the heat increasing the volume and velocity.)
kcaldwel is offline Find More Posts by kcaldwel
Last edited by kcaldwel; Oct 06, 2012 at 07:58 PM.
Reply With Quote
Old Oct 06, 2012, 11:40 AM
B for Bruce
BMatthews's Avatar
The 'Wack, BC, Canada
Joined Oct 2002
11,427 Posts
It's not only the velocity but the volume/mass that you're moving. The EDF is going to accelerate some volume related mass to some velocity to achieve the 1.8 lbs of thrust.

It's also a bit of a trick question since because the thrust is based on two factors one can take over for the other. You could have a lot of volume that is only accelerated by a little or a little volume accelerated a lot. Without pinning one of the numbers down to some reasonably accurate value for that EDF it's pretty hard to calculate the other.

One way would be to stick a large industrial size garbage bag on the outlet. Then switch the fan on and see how long it takes to fill the bag. Calculating the size of the bag and how long it took to fill that volume would give you a reasonably good value of the volume per second that is being moved. From that you could work with more equations to find the velocity of the outlet.

Or just stick your hand behind it and call it fast, darn fast or DAMN fast and call it a day....
BMatthews is offline Find More Posts by BMatthews
Reply With Quote
Old Oct 06, 2012, 12:31 PM
An itch?. Scratch build.
eflightray's Avatar
South Wales U.K.
Joined Mar 2003
13,411 Posts
Who needs calculations when you can just build a model and try it, it's a hell of a lot more fun.

I always feel the more you discuss whether a plane will fly or not, the more worried the plane gets.

Mig August.wmv (5 min 34 sec)
eflightray is offline Find More Posts by eflightray
Reply With Quote
Old Oct 06, 2012, 12:50 PM
Registered User
Cambridge, MA USA
Joined May 2001
1,742 Posts
Thrust = mass_flow_rate * (Vexhaust - Vflight)
Pideal = mass_flow_rate * 0.5*(Vexhaust^2 - Vflight^2)

where Pideal is the ideal or absolute minimum power or energy rate required by whatever is accelerating the air, either a propeller, fan, or jet engine core.
markdrela is offline Find More Posts by markdrela
Reply With Quote
Old Oct 08, 2012, 12:49 AM
German Engineering.......
HugePanic's Avatar
Auxsburg
Joined Dec 2007
453 Posts
"Please do not tell me to buy an anemometer.....ha, ha...."

Why not build one???

Some clear tubing, some water, ink and a ruler should do the job...
HugePanic is offline Find More Posts by HugePanic
Reply With Quote
Old Oct 09, 2012, 04:46 PM
Registered User
Joined Oct 2012
45 Posts
[QUOTE=markdrela;22929313]Thrust = mass_flow_rate * (Vexhaust - Vflight)

Mark, how did you arrive at this equation?
TangoKilo is offline Find More Posts by TangoKilo
Reply With Quote
Old Oct 10, 2012, 03:41 PM
Registered User
Joined May 2006
24 Posts
[QUOTE=TangoKilo;22956646]
Quote:
Originally Posted by markdrela View Post
Thrust = mass_flow_rate * (Vexhaust - Vflight)

Mark, how did you arrive at this equation?
It's part of the continuity equation, a rewriting of Newtons second law, you can see here:

http://en.wikipedia.org/wiki/Mass_flow_rate

Near the bottom of the page, under usage.

The equation Mark gave ignores the acceleration term.

The velocity term gives you a linear relationship, from maximum attainable thrust at 0 airspeed, down to zero thrust at whatever the exhaust velocity itself is.
nristow is offline Find More Posts by nristow
Reply With Quote
Old Oct 10, 2012, 04:23 PM
Registered User
Joined Oct 2012
45 Posts
[QUOTE=nristow;22965239]
Quote:
Originally Posted by TangoKilo View Post

It's part of the continuity equation, a rewriting of Newtons second law, you can see here:

http://en.wikipedia.org/wiki/Mass_flow_rate

Near the bottom of the page, under usage.

The equation Mark gave ignores the acceleration term.

The velocity term gives you a linear relationship, from maximum attainable thrust at 0 airspeed, down to zero thrust at whatever the exhaust velocity itself is.
Well, I see F = d(mv)/dt and I see F = m.a +mdot.v

but I don't see Thrust = mass_flow_rate * (Vexhaust - Vflight)

Can you briefly explain how you have rewritten Newton's second law?
TangoKilo is offline Find More Posts by TangoKilo
Reply With Quote
Old Oct 10, 2012, 06:25 PM
Registered User
Joined May 2006
24 Posts
Thrust is a force, so substituting thrust in the wiki equation and ignoring acceleration gives you

Thrust = mdot * v

where mdot is the mass flow rate. The units work out, [kg/s * m/s = kg*m/s^2].

As I've said above, the velocity term is a sum since you don't make any thrust when our velocity is the same as the exhaust velocity, and you assume that thrust tapers linearly.

Does that help at all?
nristow is offline Find More Posts by nristow
Reply With Quote
Old Oct 10, 2012, 06:41 PM
It wasn't me...
DanSavage's Avatar
Trabuco Canyon, CA
Joined Nov 2000
4,568 Posts
Quote:
Originally Posted by HugePanic View Post
"Please do not tell me to buy an anemometer.....ha, ha...."

Why not build one???

Some clear tubing, some water, ink and a ruler should do the job...
He's talking about an anemometer and you're talking about a manometer. Two different beasties.

An anemometer measures velocity and a manometer measures pressure.

But, you are right. A manometer is quite simple to build. I built one as you describe to calibrate my ASI I use to measure efflux velocity of my fans.

If one wants to measure efflux velocity of a fan, a very cheap and easy way is to buy a used ASI off eBay. I paid $35 for mine and it measures up to 250mph.
DanSavage is offline Find More Posts by DanSavage
Last edited by DanSavage; Oct 10, 2012 at 06:49 PM.
Reply With Quote
Old Oct 10, 2012, 09:52 PM
treefinder
springer's Avatar
SE MI
Joined Oct 2004
9,763 Posts
Quote:
Originally Posted by eflightray View Post
Who needs calculations when you can just build a model and try it, it's a hell of a lot more fun.

I always feel the more you discuss whether a plane will fly or not, the more worried the plane gets.
Go Ray, loved the vid! Especially the commentary!
springer is offline Find More Posts by springer
RCG Plus Member
Old Oct 11, 2012, 04:17 AM
Registered User
Joined Oct 2012
45 Posts
[QUOTE=nristow;22966584]

Thrust = mdot * v

nristow, yes, I agree. F = dm/dt * v

I would advise you not to mention that equation on the "Propeller efficiency" thread. I was shot down as a troll for doing so.

Quote,
As I've said above, the velocity term is a sum since you don't make any thrust when our velocity is the same as the exhaust velocity, and you assume that thrust tapers linearly.

If I understand you correctly, you are saying that the exhaust velocity is the maximum speed at which your model can move and at that speed no thrust is being produced. If there is no thrust what force is overcoming the aerodynamic drag?

It is true that the sum of thrust and drag equals zero but that does not mean there is no thrust.
TangoKilo is offline Find More Posts by TangoKilo
Reply With Quote
Old Oct 11, 2012, 03:34 PM
Registered User
Cambridge, MA USA
Joined May 2001
1,742 Posts
[QUOTE=TangoKilo;22956646]
Quote:
Originally Posted by markdrela View Post
Thrust = mass_flow_rate * (Vexhaust - Vflight)
Mark, how did you arrive at this equation?
Integral Momentum Theorem applied to a control volume surrounding the propeller.
Pretty standard stuff.
http://web.mit.edu/16.unified/www/SP...es/node86.html
section 11.7.2
markdrela is offline Find More Posts by markdrela
Reply With Quote
Old Oct 12, 2012, 08:19 AM
Registered User
Joined Oct 2012
45 Posts
[QUOTE=markdrela;22974919]
Quote:
Originally Posted by TangoKilo View Post
Integral Momentum Theorem applied to a control volume surrounding the propeller.
Pretty standard stuff.
http://web.mit.edu/16.unified/www/SP...es/node86.html
section 11.7.2
Mark, yes I have already read that and many other similar works.

I still can not accept the concept that thrust reduces as "Vflight" increases.
What happens if "Vflight" = "Vexhaust"? Zero thrust?

Can it truly be that aerodynamic drag, increasing as the square of the velocity, is being reacted by thrust decreasing with velocity?
TangoKilo is offline Find More Posts by TangoKilo
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 2 Turbax Fan. 2 K&B .45 Ducted fan engines one new Green Fuel Boy Aircraft - Fuel - Jets (FS/W) 2 Jun 16, 2012 11:58 PM
For Sale 2 Turbax Fan. 2 K&B .45 Ducted fan engines one new Green Fuel Boy Aircraft - Fuel - Jets (FS/W) 0 Mar 02, 2012 06:33 PM
Sold NIP Velocity WM400MK2 70mm Ducted Fan OCLightning Aircraft - Electric - Jets (FS/W) 4 Apr 16, 2010 01:48 PM
Discussion Estes Air Force Ducted Fan Jet In Action FlyBoyTha1 Foamy EDFs 0 Jan 02, 2009 12:43 PM