I am trying to calibrate the eagle eye tracker but I can't get the telemetry led to blink so I can calibrate the servos. I have the e-logger and the OSD with GPS and all are plugged into the computer. I updated all the software and every component is new and unused and installed in the airplane. The instructions do no explain how to get the led to blink. I have held the button down for 2 seconds and it beeped twice and the telemetry led comes on and stays solid.

Originally Posted by velyter

I am trying to calibrate the eagle eye tracker but I can't get the telemetry led to blink so I can calibrate the servos. I have the e-logger and the OSD with GPS and all are plugged into the computer. I updated all the software and every component is new and unused and installed in the airplane. The instructions do no explain how to get the led to blink. I have held the button down for 2 seconds and it beeped twice and the telemetry led comes on and stays solid.

Is your video transmitter turned on?

You need to be receiving video at you ground station and that needs to be getting through to your Eagle Eyes.

Geoff

Originally Posted by garris2

Is your video transmitter turned on?

You need to be receiving video at you ground station and that needs to be getting through to your Eagle Eyes.

Geoff

I discovered even though I had power from the computer to the OSD I still needed to connect the battery to the E-Logger. It now works.

Thanks,