HobbyKing.com New Products Flash Sale
 
Thread Tools
Old Jan 16, 2004, 06:02 PM
david
Guest
n/a Posts
FF9 question

Just taken delivery of my "new" FF9 T9CP and have two questions...

1. Whats the difference between a T9CP and CHP I wonder?

2. The gyro menu confuses me - I think that in "std", i.e. standard mode, I
set the normal and HH modes (so, UP at normal, 30% ish and DOWN at HH 90%
ish. I switch from norm to HH on switch F. But then there is a second
setting called "gy" and this is the one I don't uinderstand. In typical
instruction manual fashion, "gy" isn't mentioned.

Anyone?

David


Old Jan 23, 2004, 03:00 AM
WL Chung
Guest
n/a Posts
Re: FF9 question

1. Forgot the accessories, the T9CP is default(when switched on a airplane
was displayed ) for airplane and CHP for helicoptor(when switched on a heli
was displayed ). But the function is same and you can change it on the
menu.

2. 'gy' means you set it on the head lock mode.

Cheers
Lung

"david" <david_perry@btconnect.com> bl
news:bu8vds$30p$1@titan.btinternet.com g...
> Just taken delivery of my "new" FF9 T9CP and have two questions...
>
> 1. Whats the difference between a T9CP and CHP I wonder?
>
> 2. The gyro menu confuses me - I think that in "std", i.e. standard mode,

I
> set the normal and HH modes (so, UP at normal, 30% ish and DOWN at HH 90%
> ish. I switch from norm to HH on switch F. But then there is a second
> setting called "gy" and this is the one I don't uinderstand. In typical
> instruction manual fashion, "gy" isn't mentioned.
>
> Anyone?
>
> David
>
>



Old Jan 23, 2004, 06:02 PM
david
Guest
n/a Posts
Re: FF9 question

Thanks!

D

Not THE Will Chung, of the photo magazine?


Old Feb 13, 2006, 12:11 PM
david
Guest
n/a Posts
Re: FF9 question

Sorted.

I didn't know little servo reversing Y leads existed!

Thanks to all who offered ideas!

David


Old Feb 13, 2006, 12:11 PM
Mr Fixit
Guest
n/a Posts
Re: FF9 question

just be careful I have heard servos will drift with temperature on some of
these reversers
"david" <david_perry@btconnect.com> wrote in message
news:dsqbeg$96g$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...
> Sorted.
>
> I didn't know little servo reversing Y leads existed!
>
> Thanks to all who offered ideas!
>
> David
>



 


Thread Tools