New Products Flash Sale

600 X Pro Series Kit by BLADE® (BLH5625)

Take a closer look inside the just-announced Blade® 600 X Pro Series Kit in our newly uploaded photo album! Here we provide an inside look at how the 600 X is put together! Check it out!

Splash

Explosive Power and Performance!

If you feel like what you're flying is keeping you from realizing your full potential as a 3D master, shatter those limits with the explosive power and performance of the Blade 600 X. It shares the same frame and rotor head with the Blade 550 X, but adds the extra punch of an E-flite® Heli 700, 500Kv brushless motor. This abundance of power, along with the set of Revolution® 600mm carbon fiber blades that are included, will allow you to confidently explore the extremes of 3D flight with performance to spare.

Includes:

  • 1 x Revolution® Flybarless 600mm carbon fiber main blade set
  • 1 x Revolution 95mm carbon fiber tail blade set
  • 1 x E-flite® Heli 700, 500Kv brushless outrunner motor
  • 1 x E-flite 10A BEC
  • 1 x Sleek pre-painted fiberglass canopy

Key Features

  • Direct-to-swash, flybarless head design
  • Symmetrical carbon fiber main frames
  • CNC-machined aluminum head block and blade grips
  • CNC-machined aluminum swashplate
  • Revolution 600mm carbon fiber main blades
  • Revolution 95mm tail blades
  • Triple ball bearing-supported, 10mm solid steel main shaft
  • Integrated bearing block servo mount design
  • Torque-tube driven tail with aluminum tail boom and case
  • Dual-point tail pitch slider and balanced tail grips
  • E-flite® Heli 700, 500Kv brushless outrunner motor

Needed To Complete

  • 6+ channel transmitter and receiver radio system
  • Cyclic servos (3)
  • Tail servo (1)
  • 100–120 amp HV brushless ESC
  • Batteries (2 x 22.2V 6S 3200–4400mAh LiPo)
  • Charger
  • Flybarless control system

600 X Pro Series Kit by BLADE (5 min 44 sec)

Learn More Here

Thread Tools
Old Jun 21, 2013, 03:41 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Denver, CO
Joined Dec 2005
6,788 Posts
Have they got a glow version.
Roto Rob is offline Find More Posts by Roto Rob
Reply With Quote
Old Jun 21, 2013, 01:20 PM
Rickn816 is offline
Find More Posts by Rickn816
RCHN #150
Rickn816's Avatar
Lawrenceville, GA
Joined Nov 2007
5,999 Posts
Sorry, guys.
That is a lot of money for a Blade heli-without electronics.
Rickn816 is offline Find More Posts by Rickn816
Reply With Quote
Old Jun 22, 2013, 11:44 PM
Znybar is offline
Find More Posts by Znybar
Registered User
Joined Sep 2012
392 Posts
Notice they're not including their ESC in the kit anymore...

And 580 for a kit with revolution blades (100 bucks by themselves) and a motor isn't bad. Plus now you're not paying for things you don't want any more.
Znybar is offline Find More Posts by Znybar
Reply With Quote
Old Jun 23, 2013, 03:01 AM
ebonicrobot is offline
Find More Posts by ebonicrobot
Registered User
Joined Sep 2004
39 Posts
$580 for 600 kit and blades is not bad at all.
ebonicrobot is offline Find More Posts by ebonicrobot
Reply With Quote
Old Jun 23, 2013, 11:09 AM
jasmine2501 is offline
Find More Posts by jasmine2501
Rocket Programmer
jasmine2501's Avatar
United States, AZ, Mesa
Joined Jul 2007
25,681 Posts
Marketing sure is having fun with people...
"If you feel like what you're flying is keeping you from realizing your full potential as a 3D master, shatter those limits with the explosive power and performance of the Blade 600 X."

Wouldn't it more likely be your skills keeping you from realizing your potential as a 3D master?
jasmine2501 is offline Find More Posts by jasmine2501
Reply With Quote
Old Jun 23, 2013, 11:15 AM
Kauaiguy is offline
Find More Posts by Kauaiguy
Registered User
Kauai
Joined Jan 2011
4,892 Posts
Na,it couldn't be my skills,just need a bigger heli!!!
Kauaiguy is offline Find More Posts by Kauaiguy
Last edited by Kauaiguy; Jun 23, 2013 at 12:31 PM.
Reply With Quote
Old Jun 23, 2013, 12:22 PM
finguz is offline
Find More Posts by finguz
Registered User
finguz's Avatar
United States, CA, San Diego
Joined Mar 2012
2,572 Posts
Quote:
Originally Posted by jasmine2501 View Post
Marketing sure is having fun with people...
"If you feel like what you're flying is keeping you from realizing your full potential as a 3D master, shatter those limits with the explosive power and performance of the Blade 600 X."

Wouldn't it more likely be your skills keeping you from realizing your potential as a 3D master?
Ha, that's hilarious! I guess it's for those in denial. My current helis are definitely the reason I can't do tumbling/rolling circuits.

It should just read, 'tired of blaming the machine? Get a Blade!' .
finguz is offline Find More Posts by finguz
Reply With Quote
Old Jun 24, 2013, 08:24 PM
Mike_Then is offline
Find More Posts by Mike_Then
I hate waiting for parts
Mike_Then's Avatar
United States, NC, Garner
Joined Apr 2001
7,368 Posts
So wait, it's basically the Blade 550X with an upgraded motor, slightly larger blades, and a different canopy? Or am I missing something here?
Mike_Then is offline Find More Posts by Mike_Then
Reply With Quote
Old Jun 24, 2013, 09:02 PM
DJO is online now
DJO
Find More Posts by DJO
DJO
Custom FPV Setups
DJO's Avatar
United States
Joined Oct 2011
3,751 Posts
Quote:
Originally Posted by Mike_Then View Post
So wait, it's basically the Blade 550X with an upgraded motor, slightly larger blades, and a different canopy? Or am I missing something here?
+1... I was thinking similarly...
DJO is online now Find More Posts by DJO
Reply With Quote
Old Jun 25, 2013, 08:21 PM
satgod is offline
Find More Posts by satgod
Registered User
satgod's Avatar
United States, KY, Hardin
Joined Jun 2011
723 Posts
almost any 550 can be stretch to a 600 and look good doing it
longer boom/blades, slightly larger motor and a nice canopy
I stretch my 450 to a 480 and it looks just like a 500
satgod is offline Find More Posts by satgod
Reply With Quote


Thread Tools