|Oct 26, 2013, 10:22 AM|
United States, WI, Hudson
Joined Nov 2012
Double check my order please
Ok... Finally think I'm ready to place my order and would love it if you guys looked over my list, and told me about any glaring screw ups I'm either missing or ordering. I'm pretty much starting from nothing.
I'm building a wood frame, H quad design and am ordering from HK:
(5) DT750's and the nuts for them - (1 spare)
(5) Plush 30's - (1 spare)
(1) KK2 control board
(1) 2200 3s 25c battery
(1) Turnigy 9X 9ch mode 2 (or should I get mode 1?) TX/RX combo
(4 of each) 11X4.7 props,
(1 mtr) 14G wire black
(1 mtr) 14G wire red
(5 pr) XT60 connectors
(10 pr) bullet connectors
(1 mtr) 6mm heat shrink tubing - red and black
(1) battery strap.
Anything else I should order?
What about a battery charger? I have a Hobbico 900, 35-75 mA trickle charger, with a 5A max fast charge (for my RC cars) will that work?
|Oct 28, 2013, 11:40 PM|
New Zealand, Canterbury, Christchurch
Joined Dec 2012
Looks ok, you'll need to make sure your frame is large enough to spin 11 inch props, and depending on that you may need more wire that you have.
Mode 1 or Mode 2 TX is a personal preference only. Doesn't matter as they still function the same.
Your charger doesn't appear to charge LiPo's so no, it won't work. You'll need a new charger, something like the Accucel 6 will probably be fine. If it were me I'd also be getting a higher C rating on the battery. Your current one maxes out at 55A
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Double check my wiring?||Pathfynder||FPV Talk||0||Sep 02, 2013 02:19 PM|
|Help!||Double check my problem||mcnowhere||Radios||0||Jul 21, 2013 10:45 AM|
|Discussion||When soldering wires together check & double check!||tupeloflyer||Electric Plane Talk||11||Apr 24, 2013 12:56 PM|
|Discussion||Double-check my NIMH charging?||overmyhead||Batteries and Chargers||6||Feb 01, 2013 07:53 PM|
|Help!||Please double check my items!||shadowpho||Multirotor Talk||6||Jan 05, 2013 08:21 PM|