|Jun 20, 2012, 01:54 PM|
Hacker A60 6XS 28 V2......ESC choice?
Hey guys.....I got one of these newer little hacker motors ( Hacker A60 6XS 28 V2 ) a while ago , and the bird I'm putting it on is one of RC Charger's Giant Fuzion's. I'm figuring I'll be running a 20X10E or 21X10E prop on this thing and it will be ran off some 5000man 6S packs.
Since it's going to be a 6S setup and running those props.....what do you think my estimated watts and max amps may be? 90amps , 100 amps....120amps?
Do you think I can get away with just using a CC ICE 100 esc , or should I go for something a little bigger like a HV120 or something?
I want some head room and don't want to max the ESC out....and have always preferred to run things slightly bigger on the ESC's.
Any advice on this would really help.
|Jun 20, 2012, 09:21 PM|
Hacker A60 6XS
All readings with TP 5000mah 6S 65C Battery
20/10 APC - 83amps- 2210watts- 6360rpm
20/10 Xoar E wood- 83- 1900watts- 6420rpm
20/12W APC- 100amps- 2200watts- 5950rpm
19/12W APC- 90amps- 2100watts- 6120rpm
Hope this helps. Chuck
|Jun 21, 2012, 01:22 AM|
That helps a lot Chuck....thank you! I have seen so many people use this motor , and for the life of me I couldn't find any specs on the dang thing. I'm planning on sticking with the wood E Xoar props.....so with a 20X10E and maybe possibly even a 21X10E it looks like I would be in the clear using an ICE 100 I think.
Thanks again Chuck!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Hacker A40-12S V2 motor and Hacker X70 SB ESC||helijet||Aircraft - Electric - Power Systems (FS/W)||4||Mar 29, 2012 09:35 PM|
|For Sale||Hacker A60-22s and hacker mount parts||longhair||Aircraft - Electric - Power Systems (FS/W)||2||Mar 15, 2012 09:25 PM|
|Sold||A60-6XS V2 28 Pole Outrunner||JRAllen||Aircraft - Electric - Power Systems (FS/W)||4||Feb 13, 2012 12:53 PM|
|Question||ESC for Hacker A60-7S V2||Brill 1||Power Systems||1||Nov 01, 2011 09:48 PM|
|Discussion||Hacker A60-6XS V2, is a 12s lipo okay?||benaresenferno||Power Systems||0||Jun 25, 2011 10:33 PM|