HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Dec 30, 2008, 03:03 AM
Xtreme Nut
Kuala Lumpur, Malaysia
Joined Oct 2005
2,046 Posts
Discussion
GP Super Sportster 40

I just got my SS40 sorted out and am about to work on the conversion. It will probably be flying on 5S and I do have a few motors for her, namely the Plettenberg Orbit 25/18 and a DualSky 4260. Both motors on 5S will ensure she has tons of power. However, I am not keen to dremel out the support beams on the cowl.

I do have an AXI 2826/12 and I know she will be nice on 4S. I did read on the AXI website that the motor is rated for up to 5S. I think she AXI 2826/12 can handle a 5S set up with a 12x8. Motorcalc says it will be drawing 62A WOT.

Anyone can let me know if the motor can handle such amp draw? If not I guess its time to bring out the dremel and use one of the bigger motors or just go with a 4S set up.

Thanks!
tIANcI is offline Find More Posts by tIANcI
Last edited by tIANcI; Dec 30, 2008 at 06:24 AM.
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question GP super sportster 40 nose arc1 Glow to Electric Conversions 0 Mar 30, 2007 08:32 PM
Discussion GP Super sportster 40 filtvet Glow to Electric Conversions 5 Oct 16, 2006 05:06 PM
Side engine mount on GP Super Sportster .40 fedotti Engines 10 Oct 24, 2005 05:57 AM