|Aug 17, 2012, 10:37 PM|
Las Vegas, NV
Joined Jun 2007
Review: Nitro WACO YMF-5D
Review WACO YMF-5D Model.
The box arrived in excellent condition (Double Boxed). All of the items were mounted in a sealed plastic bags, installed in a cardboard box…The assembly went very smoothly, without any problems…Step#5 needs to be revised…why install the STABILIZERS..?
When on Step#11 you have to glue the RUDDER to the STABILIZER, then install it
on Step#12…? I would recommend that all the STRUTS be installed on the TOP WING,
rather then noted on Step#6..it would make it a little easier..I did find that the PA2.3*
20mm screws are too short..it should be PA2.3*25mm. That is the only exception that
I found while building the WACO…While installing the TOP WING..minor adjustment
was require to square the WING with the STAB…
Test flew the airplane..CG was set at 75mm…flew very well, very stable flying in a
10 mph wind…This is a winner.
|Sep 11, 2012, 11:47 AM|
United States, TX, Rhome
Joined Jul 2005
|Oct 18, 2012, 10:36 AM|
USA, MI, Portage
Joined Sep 2003
Just ordered the Wako. Looking for any other tips for building and flying. Uses a 640kv motor on 4 cells with a 40amp ESC. I have a feeling that the 40amp ESC may be a tad light on this power package... any other thoughts?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||Dynams Waco YMF 5D||BRUTUS2238||Parkflyers||3687||Sep 18, 2014 09:33 PM|
|Article||Great Planes Waco YMF-5D Biplane ARF 72" with OS 95AX 2-Stroke Review||kingsflyer||Scale Fuel Planes||45||Mar 02, 2013 08:33 AM|
|Discussion||Great Planes Waco YMF-5D Biplane ARF .91-1.20||jonnyspeed||Glow to Electric Conversions||23||Apr 30, 2012 05:51 PM|
|Sold||LPU Great Planes Waco YMF-5D airframe $200||RCGill||Aircraft - Fuel - Airplanes (FS/W)||5||Apr 04, 2012 11:39 AM|
|For Sale||LPU Great Planes Waco YMF-5D RTF $300||RCGill||Aircraft - Fuel - Airplanes (FS/W)||9||Mar 22, 2012 12:42 AM|