Hello,
I'm finishing a conversion kit of little miss canada III in RC with all internal materials from a little magic cat.
If anybody is interesting I can send pictures and methods...

Is it the kit from Osbornmodels?
http://www.osbornmodelkits.com/RC_model_boat_kits.htm
A friend of mine built the larger one(1/12 scale) a few years ago and it was a good runner. The smaller 1/24 kit would be more tricky due to size:
[Miss Canada III
A 1/24 scale static display model of the sleek stepped hydro.
Length 12.25”
Beam 3.5” ]

hello,
sorry for my responding time. I was quite busy.
Yes, it's the little one.
I just putted in it all the materials from the little magic cat, but still have some work (I lose the signal after 5/8meters)

I would be very interested in any information that you could give me about your conversion, have been considering this for years...

hi all, if anyone has built the osborn miss canada II kit can you advise on electrics set up...im almost finished building the boat but dont know the best way to set it up with all the running hardware!

any help appreciated

cheers

jon

Osborne models has running hardware for the 1/12 scale "Miss Canada III", the 1/24 size model is intended as display so your best bet would be to use the drive from a similar sized existing boat(finding an usable prop would be the biggest challenge).