Its finally time to start a thread on my Indoor 330sc, I started playing with this design at the end of last season, its become very refined and I'm very happy with the performance of the model.

The kit contains: Precision CNC cut Depron foam parts with pre-beveled hinges, A complete CF hardware kit(either push pull or pull pull available), Plywood motor mount, All CF rods & spars needed, Hinge tape, Music wire & heat shrink for push rods/pull pull sting, Push rod standoffs and a basic Vinyl graphics kit.
Instructions are available for download on my website.

A quick look at the specs:
Wing Span: 34"

Length: Approx 34"

Flying weight: 4.5-6.5 oz

Recommended Radio gear: 1x HS-65/3114(Ailerons) 2x HS-35's(Rudder & Elevator)

Motor: 15-20g outrunner 1700-2300kv(AXI 2203 recommended)

ESC: 6-10 amp

Battery: 2s 240-460 Lipo(240-325 in the gym, 325-460 outside)

For more info or how to order please visit my website @:http://www.bowker-aircraft.com/extra-330-sc-depron/

A video of me flying a milled 330sc at the recent CAF fun fly in TX:

Bowkers new Depron Extra 330 #2 (3 min 42 sec)

Feel free to ask questions/post comments.

Thanks for looking,
Chris
www.Bowker-Aircraft.com

Reserved.

Couple pics of my 2 extras!

So far I`m very happy with the performance of the 330, it to me is a combination of the crisp f3p foamies, with a toss around freestyle foamy. Mine both came out around 4.6 ounces but feel much lighter and fly just the same. Since starting to fly Chris`s foamies, like the yak 55, and the Mx2 I think this one is by far the best flying to date!!!!

That blue/purple scheme is badass! If it flies like your other planes, then I probably need one. These things work right, no matter who you are!

Originally Posted by FASTALJR

So far I`m very happy with the performance of the 330, it to me is a combination of the crisp f3p foamies, with a toss around freestyle foamy. Mine both came out around 4.6 ounces but feel much lighter and fly just the same. Since starting to fly Chris`s foamies, like the yak 55, and the Mx2 I think this one is by far the best flying to date!!!!

Thank Al!
Oddly that's exactly what I was going for with the 330....If I had a criticism on my older yaks & mx2 it would be that they leaned to the 3D side to much and took a little work to draw consistent lines in the gym. The 330 on the other hand is very constant and predictable, on low rates it really is a pattern ship, and on high rates its an animal.

Chris

Hey Al, why don't you build one for me and for Paul? We can pick them up when we come up to fly with you after the holidays!! haha.

Here is a photo of Chris flying the Bowker Aero Model 330SC at the 2012 Indoor event in Midland, TX. Our fly-in was held in the Commemorative Air Force Hangar, with FiFi as a backdrop.

I had a chance to fly Chris' plane, and it flies very well. Nice and stable, and also quick and responsive. I enjoyed it so much, I had to have one. I've been wanting to build a milled freestyle plane, so I thought I'd give the 330sc a try.

aerolite

Great photo, Thanks for posting it! FiFi was an excellent back drop for the fly-in.

I look forward to flying with y'all again at TINY 2013.

Chris

Just added the 22" version of my 330 to my website, designed for the gear out of a HH UMX Beast.

http://www.bowker-aircraft.com/22-extra-330-sc/

Chris

I want this 22" please provide video

Originally Posted by Micro Budget

I want this 22" please provide video

This wasn't exactly the footage I wanted to use, but due to the lack of an extra set of hands to hold the camera when the weather is good and losing all my regular indoor gym's this was the best I could do for now

PS. looks better in full screen

22in 330sc (5 min 14 sec)

The 18" micro version of my 330 is up on my site now too, You can use the coupon code: RCG18 to save 15% off either micro version now through next Monday.

http://www.bowker-aircraft.com/ultra-micro-kits/

Chris

Originally Posted by ChrisBowker

The 18" micro version of my 330 is up on my site now too, You can use the coupon code: RCG18 to save 15% off either micro version now through next Monday.

http://www.bowker-aircraft.com/ultra-micro-kits/

Chris

I want one!!!

Originally Posted by TMAC4123

I want one!!!

Besure to check out the build thread for the micro versions at: http://www.rcgroups.com/forums/showthread.php?t=1825536

Also today is the last day that the coupon code "RCG18" will give you 15% off either micro version on my website.

Chris