Originally Posted by Tornado Jack

Tamjet Strut Diameter: 0.137 in (3.5mm)

Yes, it can fit in Habu 32, and our standard axles Dia 3mm/4mm/5mm

For any special axle you need for your Jets.

Please contact our dealer in USA ( Shulman Aviation)

Thanks

Thank you. Can the axles be swapped out? I bought a set of these a while back and the axles are too big for the tamjets struts.

Originally Posted by rfodor

It is on/off, but the force is adjustable (on the ground) so that should work fine.

The tires are nice.... solid rubber, not too hard and not too soft. I have already painted the rims silver so they don't look like Soviet era wheels.

haha, that is cool, Our new Metal brake has great improvement,please check as below.



It available in Germany now ,from amaxrc.com and rc-jets.eu

Thanks.

Originally Posted by Tartago

I thought they were these:

http://www.sigmfg.com/IndexText/KAV0263.html

The material we used and the inner structure is very different.

Anyway, Thanks for posting the link.

Originally Posted by v8truckin

Looks like the skyflight/LX B25 79"(distributed by BH) brakes which I believe the plane is at least 12-15lbs wet n wearing boots. correct me if I'm wrong...

The metal magnetic brake can up much more weight than the plastic version ,

FYI

Jack

Originally Posted by Tornado Jack

haha, that is cool, Our new Metal brake has great improvement,please check as below.



It available in Germany now ,from amaxrc.com and rc-jets.eu

Thanks.

Very nice.

Do you sell direct in Asia?

Originally Posted by Tartago

Very nice.

Do you sell direct in Asia?

And the price?Hope it's not too expensive!!

Originally Posted by Tartago

Very nice.

Do you sell direct in Asia?

Thanks,

Jack

Originally Posted by Tartago

Very nice.

Do you sell direct in Asia?

Thanks,

We usually sell to dealers or distributors rather than direct to cutomers.

as the manufacturer , we dont have plenty time to sell and service everyone.

Anyway, If there is no dealers in that country, we would sell direct to customers at retail prices.

Take care,

Jack

Taiwan Tornado

Originally Posted by viperviper

And the price?Hope it's not too expensive!!

The magnetic brakes are at decent price according its quality.

Thanks!

Originally Posted by DamonH

Thank you. Can the axles be swapped out? I bought a set of these a while back and the axles are too big for the tamjets struts.

You are welcome, Did you bought the plastic version magnetic brake?

The NEW Metal magnetic brakes have 3mm/4mm/5mm for opitional now,

It the tamjets struts with 3.5mm diameter hole?

Can you measure the diameter and length to us?

Thanks

Originally Posted by Tornado Jack

You are welcome, Did you bought the plastic version magnetic brake?

The NEW Metal magnetic brakes have 3mm/4mm/5mm for opitional now,

It the tamjets struts with 3.5mm diameter hole?

Can you measure the diameter and length to us?

Thanks

Yes, I bought them when they were first available and they are the plastic ones. The diameter looks to be 4mm and the length the axle sticks out is about 8mm.

ok. will consider if it;s not too expensive.

Originally Posted by viperviper

ok. will consider if it;s not too expensive.

Hi Viper,

Thanks for supporting us (:

Hi Guys:

Well, today we got a surprise delivery from FedEx--3-cartons of our Em~Brakes just arrived from Taiwan-Tornado!!
We now have every size wheel, with every size axle in stock. Attached is a pic. taken just after we opened the cartons,
along with a set 'out of the package.'

More info and a video are on-line at our website-

http://shulmanaviation.com/index.php?cPath=1_287

We will start shipping all 'pre-orders' tomorrow.

Thanks again for your patience, and thanks to Tom and Jack for doing a great high quality job in getting these to us so quick

Take care and enjoy.

Regards,
Don
1.407.255.8525
www.shulmanaviation.com

Skymaster Jet F15's air brake wheels have been changed into Taiwan Tornado Magnetic brake wheels 6mm axis