 |
 |
 |
|
Sep 20, 2011, 08:16 PM
|
|
United States, PA, Dover
Joined Aug 2011
5,597 Posts
|
can you make the dx6i with ratched throttle?
i have seen some things where it says ratched throttle with dx6i do you have to open the dx6i up and like mod it or is it in the settings or something?
|
|
|
|
|
|
Sep 20, 2011, 08:46 PM
|
|
Kadena AB Okinawa
Joined May 2004
271 Posts
|
You have to take the back off the radio, 6 screws.
Separate the halves carefully because there are wires for the back switches, buddy cord, and battery tray that are connected to the main board and the back half. Then on the back of the Throttle/Rudder gimble your right when looking in the back of the radio. You will see a strip of metal. You have to take the screw that's holding it off, and switch it around. Once you tighten the screw you will have the ratchet. |
|
|
|
|
Sep 20, 2011, 08:51 PM
|
||
|
United States, PA, Dover
Joined Aug 2011
5,597 Posts
|
Quote:
|
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mini-HowTo 1 Foam/Paper and 1 Carboard Sloper You can Make... | KeithWhiter | Slope | 6 | Sep 18, 2011 01:41 PM |
| Discussion How Can You Deal With A Specter? | LcJ | Life, The Universe, and Politics | 45 | Sep 09, 2011 09:24 PM |
| Discussion Can you use the DX6i with the PA Ultimate AMR? | DePol | 3D Flying | 1 | Aug 23, 2011 08:19 PM |
| Discussion I make bad decisions, so can you make some for me? | davebloomer | Beginner Training Area (Aircraft-Electric) | 87 | Jul 20, 2011 12:58 AM |
| Discussion How big can you make a Brushless motor??? or... Can we fly real planes with these? | SGTalon | Electric Motor Design and Construction | 62 | Aug 03, 2007 04:08 PM |
|
|