Hello to All,
ZERO-Steadi470 is an excellent Aerial Photography System which creats the greatest possibility to make the most stable aerial photography videos & photos.
It will be released in September 10th, 2012 for China market. October 10th, 2012 for International market.
Marketing Price: USD1999

Preorder deal before September 9th, 2012
USD1739 (USD260 reduced)
DELIVERY TIME: 30 working days upon receipt of full payment.

What are included:
1 Airframe×1
2 Camera Gimbal×1
3 Motor×4
4 ESC×4
5 Propeller×4
6 Servo×2
7 Flight controller×1（YS-X6 Basic 4 waypoints version + Steadi470 IMU）
RC transmitter & RC receiver & battery are not included. Currently the Zero-Steadi470 only supports the Futaba S-BUS system for radio control. This means in order to pilot by radio control you must have a Futaba S-BUS compatible receiver.

Description
》 Controlled by YS-X6, simple configuration and calibration;
》 Pitch and Roll 2-axis angle can be adjusted by transmitter;
》 Easily controlled by personal handheld Phone/Tablet as ground station;
》 Intelligent course lock（Carefree ) function;
》 Intelligent interest point lock, target lock and follow me;
》 Special damper, maximize decrease or remove "Jelly Effect";
》 Rapid and effective modification algorithm, strong video stabilization;
》 Stable aerial filming & photography system with the highest P/C ratio;

》 Fully open Target Lock & Fly Encircle function.
》 Auto (Takeoff/ Go Home/Landing)
》 Handfeel Control (Phone Attitude Control)
》 Click/Touch & Fly To Point
》 Realtime Flight status (Google Earth Map)
》 Follow Me (Auto-tracking)
》 Auto-Navigation (4Waypoints)
》 Fail/Safe (auto hover--go home--landing)
》 Low Voltage Alert (By Phone Vibration)
》 RTH Switch from Transmitter directly
》 Built-in Gimbal Stabilization
》 Flight Control Mode(GPS Atittude Mode/ Atittude Mode/ Manual Mode)[B]

Technical Specifications
Max takeoff weight：2.8kg
Max load weight：300-400g(SONY nex5, Panasonic GH2(need extra part）
Flight Endurance：No payload: 18 mins, full payload:10~12 mins
Flying Speed：Max 10.2m/s（adjustable）
Wind Resistance：7-8m/s（level 4）
Flight Altitude：Max 1000m

More Introduction here:
http://www.zerouav.net/site_mag/UpLo...-Steadi470.pdf


Where to buy?
Please contact local dealers to preorder!
Or contacting the manufacturer directly if the regions where have no dealers temporarily.

Sales: sales@zerouav.com
Technical Support: support@zerouav.com
Other information: info@zerouav.com
Website: www.zerouav.com

Zero UAV (Beijing) Intelligence Technology Co. Ltd.


Videos （More videos will be attached）

ZERO-Steadi470 Raw Videos

ZERO-Steadi470 Aerial Photography System.mpg (2 min 49 sec)

YS-X6 "LS" Gimbal Test (2 min 4 sec)

ZERO-Steadi470 Installation and Gimbal Calibration

ZERO Steadi470 Installation videos Part 1 (14 min 29 sec)

Zero Steadi470 Installation videos Part 2 (6 min 42 sec)

ZERO Steadi470 Gimbal Calibration video (7 min 5 sec)

Firmware Upgrade

Zero UAV Serial Port Configuration and Firmware Upgrade (2 min 1 sec)

ZERO-Steadi470 has been released in Chinese market, the raw videos taken by customers are listed as below, hope it can bring you a new visual impact.

ZERO-Steadi470 --Aerial video with high speed in manual mode
http://v.youku.com/v_show/id_XNDU4NzYwMDky.html

ZERO-Steadi470 --Aerial video in GPS mode
http://v.youku.com/v_show/id_XNDU4NzcwMTA0.html

ZERO-Steadi470 --Aerial video in park
http://www.56.com/u94/v_NzQwNTMxMzk....id=NzQwNTMxMzk

ZERO-Steadi470 --Aerial view of Beijing Carnival
http://v.youku.com/v_show/id_XNDU3MTA0MjU2.html

ZERO-Steadi470 --Aerial view of beautiful site--Xicheng Pavilion
http://v.youku.com/v_show/id_XNDU4MzMzMjY0.html
ZERO-Steadi470 --Fly on the sea
http://www.tudou.com/programs/view/p...20533_06_02_99

ZERO-Steadi470 --Aerial view of Sugarbush Garden
http://v.youku.com/v_show/id_XNDU4MTg1MTQ4.html

ZERO-Steadi470 --First flying
http://v.youku.com/v_show/id_XNDU2MDUwNjg4.html

ZERO-Steadi470 FPV--aerial view of the building at night
http://v.youku.com/v_show/id_XNDU5MDc2OTcy.html

safa...

Wasn't there another thread on this topic?
Yep, there is: http://www.rcgroups.com/forums/showthread.php?t=1713583
Why start this one?

It is showing more updated and confirmed details about the product to everybody, and preorder starts now.

Because ZEROuav likes to clone and spam and NOT pay to sponsor the forum they are trying to profit from.

You guys need to get your act togeather cus if you cannot afford a sponsorship your company must not be doing well.
Maybe thats why you sell everything pre-order so you can use the customers money to have your clones made.

Originally Posted by Z06 Tony

Because ZEROuav likes to clone and spam and NOT pay to sponsor the forum they are trying to profit from.

You guys need to get your act togeather cus if you cannot afford a sponsorship your company must not be doing well.
Maybe thats why you sell everything pre-order so you can use the customers money to have your clones made.

http://www.rcgroups.com/pages/splist/


Nice try though, Tony.

Isn't this a copy of the Ecilop and isn't the Zero controller a less mature copy of the WKM?

A copy of WKM would have the same crappy flight characteristics. This one doesn't. So, no, it's not a copy. Nice try though.

So it's a copy of the Ecilop then?

I dunno, I don't own ecilop.
I wish they'd stay out of making frames and focus on flight electronics though.
Or perhaps on making their existing system a bit smaller. Its kind of xbox-sized the way it is now.

"Its kind of xbox-sized the way it is now."

ha ha ha

@TC if they did not have multiple acts it would have been easy for me to see they are now a site sponsor.
Then it would be properly displayed in there nic.
As you can see it is not.

It is also in there best interest to ONLY have 1 act that says zero uav.

Some companies have more than one employee, you know.
At least they don't have any shill accounts posting amazing success stories and zero-wind tail-in hoverings.

Timecop, I was going to start helping you, but you seem to be doing very well by your self. Quite calm actually.

By the way, I like the size of the YS-X6 unit, and on a decent size Centre Plate (for something larger than a 450 quad), it works quite well.

Originally Posted by robone

Timecop, I was going to start helping you, but you seem to be doing very well by your self. Quite calm actually.

By the way, I like the size of the YS-X6 unit, and on a decent size Centre Plate (for something larger than a 450 quad), it works quite well.

LOL he doesnt need any help.
He has plenty of funny zingers.

@TC please be a good boy so I can start quoting you again.

Even though we dont see eye to eye I love your humor.