|Apr 06, 2005, 09:09 AM|
Joined Mar 2005
2100 charge rate
Hi, I just purchased the Dynamite Vision Peak Ultra and a Thunder Power 2100mah pack with these specs:
2100 mAh, 2 cells (7.4V)
Rating: 10-12C (21-25A) continuous, 16C (33A) burst
Output: 7.4V Nominal, 2100mAh
Dimension: 34mm x 98mm x 13mm (98gr)
The Vision charger has adjustable charge rates for lipo from .1a to 2.5a.
My question is this- 1c charge rate for this pack would be 2.1a but I have heard its best to charge at a lower rate the first few charges. So would say 1.5a be an acceptable rate for say the first 6 charges. Then I could move to 2.0a for regular charges. Oh and at 1.5a I would expect it to take 100 minutes to charge?
|Apr 06, 2005, 10:03 AM|
As per the TP Safety Sheet take it a little easy for the first several flights.Make sure LVC is set to 3 volts per cell and try to land befor LVC for the first several flight especially. Let battery rest(cool) to ambient temperature befor re charging.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Lipoly question - TP 2100 Charge Rate||ChuckD||Power Systems||3||Nov 26, 2004 04:04 AM|
|Max charge rate for AR's?||Kosh||Electric Plane Talk||8||Oct 13, 2001 02:49 PM|
|What is safe charge rate for 2000 Nimh Panasonics ?||Al P||Electric Plane Talk||5||Jul 18, 2001 01:22 AM|
|'Green' 500 ARs - maximum charge rate?||Bill Glover||Electric Plane Talk||6||May 23, 2001 01:30 AM|
|For 9.6V 1600ma NIMH battary what is the charge rate and charge time?||clchen||Electric Plane Talk||7||May 06, 2001 10:06 PM|