|Mar 09, 2013, 05:21 PM|
9oz flying weight motor suggestions.
Hey guys, I'm building an outdoor 3d flat foam plane. It will be running a 20amp esc on 3 cells. Total weight is just under 9oz. My current motor is way to much so I'm searching for a new one but don't really understand all the KV and watt talk. Please help!
|Mar 09, 2013, 06:12 PM|
Use the wing loading page to calculate your stall speed to then allow you to choose a motor prop combo.
Or post up all the dimensions of the plane and its dry weight and we could have a fiddle with the online calcs to give you an idea.
|Mar 12, 2013, 05:06 PM|
Calculate Wing Loading, Area & Stall Speed
Wingspan: inches 26
Wing Root Chord: inches 7
Wing Tip Chord: inches5.5
Or the Average Chord: inches 6.3
Or the Wing Area: sq.in 163.8
Model Weight: ounces 8
Max Lift Coefficient:
WING LOADING: oz/sq.ft 7.3
CUBIC LOADING: oz/cu.ft. 6.59
STALL SPEED: mph 13.1
I'm not sure if that is what you were looking for but that is what I get when I put the numbers in.
|Mar 13, 2013, 01:33 AM|
Joined Sep 2004
I run the 1300kv 24g Bluewonder from HobbyKing on a couple dozen planes and the 1500/1700Kv as well.
It powers my 10-13ozs planes with better than one to one thrust, about 14ozs of thrust on a 3 cell.
So for a 9oz plane, it should have enough power to do lots of 3D.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Dji f450 weight for fpv flying||WATTS2005||Multirotor Talk||1||Apr 21, 2013 02:56 AM|
|Discussion||Need Suggestion on motors!||abriosi||Multirotor Talk||5||Jan 12, 2013 03:36 PM|
|Wanted||motor for 35-67oz flying weight||Doushiyou12||Aircraft - Electric - Power Systems (FS/W)||1||Mar 26, 2011 04:24 AM|
|Discussion||Flying Weight / Lift / Motor Correlation||jmendell||FPV Talk||10||May 23, 2007 08:14 PM|
|Discussion||Motor suggestion for light weight 150W DD||PFTrvlr||Power Systems||1||Mar 14, 2006 04:29 PM|