Joined Jan 2007
MK Hexa XL Frame with 3x HiLander 26 Legs
MK Hexa XL frame with 3x HiLander 26 legs, originally from mikrokopter.us a few years back. Was used for aerial photography in various setups. NEVER crashed or mistreated, it shows signs of assembly and use, but nothing that will impede performance. Probably has light scratches somewhere, but I didn't detect much.
I'm not sure exactly what came with it new, but this is what I have:
Riggers 355mm long (1 red, 5x black)
2 Center Plates
4 plastic spacers for center plates
20 metal screws M3x16
20 locking nuts M3
20 nylon screws M3x16
20 nylon nuts M3
4 nylon standoffs (M3x16?)
3 HiLander 26 legs with all hardware
Some spare nuts and bolts
I never used MK electronics, just liked the light (~340g) inexpensive frame, so there may have been other bits that are now missing. Everything needed to assemble as seen in the photo is included.
Had to move to a new frame to accommodate 14" props and it's been sitting unused for weeks, so I should let it go.
$120 paypaled and shipped to the lower 48.
I've only bought one item here, but I have over a decade of feedback on ebay as volvoben and some feedback on fredmiranda forums (photography gear) as noben.
In its last setup shooting a New England academic campus this winter.
Frame worked particularly well with NAZA/GPS, 2814-10 motors, and 25-30A SimonK flashed ESCs on 2x5000mAh 4s with APC 12x3.8/Graupner 11x5/Graupner 12x6/Graupner 13x8 props, depending on camera weight and wind.
Quick test pano I took that day...
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||MK-HEXA XL Black x 4 and Red x 1 arms. Original MK..||jetbootz||Aircraft - Electric - Multirotor (FS/W)||0||Oct 08, 2012 07:30 AM|
|Sold||MK Quad XL-Frame set + HiLander-26||DavorVZ||Aircraft - Electric - Multirotor (FS/W)||3||Jan 06, 2012 04:32 PM|
|Discussion||MK Quadro XL or Hexa||Ripper78||Multirotor Talk||9||Feb 23, 2011 12:56 PM|
|Wanted||Quad and/or Hexa frame - MK frame / Flexlander||beeker_12||Aircraft - Electric - Helis (FS/W)||1||Feb 18, 2011 07:04 PM|