|Aug 06, 2012, 03:25 PM|
Joined Mar 2009
first scale build need help
hi everyone. i need help again
im putting my trex 600 into a scale body with retracts.
im using a spektrum dx6i and a ar7000 rx.
spartan quark gyro
the thing a want to ask is very silly really.
can i run it all ie gyro and retracts.just when i plug the retracts to the gear channel its seem's to lower the pitch ie all 3servos move to a lower poison.and the retracts work on the gyro switch on th tx..
im getting really confused so can someone put me right please .....
|Aug 06, 2012, 04:02 PM|
I am guessing you have the gear switch setup for normal / idle-up correct? if you are gonna use the gear switch for actual gear, then you will need to not use it for idle-up.
|Aug 06, 2012, 04:12 PM|
If so, I think it's because of a limitation of your radio gear. The DX6i is only a 6-channel radio and all of those channels are currently in use. You have your three cyclic servos, rudder, ESC/throttle, and gyro gain (if that gyro supports that function). You'd have to unplug the gyro gain from the gear channel - I'm a Futaba guy so I know it as Channel 5 - to use the retract function.
The other thing that strikes me as possible is a possible conflict with the throttle hold function. Do you have any sort of custom mixes set up for this model, outside of the CCPM?
|Aug 06, 2012, 04:14 PM|
Joined Sep 2011
If you use a 6 channel radio. You will ned to set the gyro via the gyro trim pot as you need to use the gyro switch on the radio for your retracts.
Hope this helps
|Thread||Thread Starter||Forum||Replies||Last Post|
|Help! Help finalizing on parts list for first build!||nloding||Multirotor Electronics||9||Aug 08, 2012 07:49 AM|
|Discussion F-15 foam first time scratch build, parts list, help||wanna go faster||Foamies (Scratchbuilt)||5||Jul 27, 2012 12:03 PM|
|Discussion First scratch build of a scale plane||Reddog170||The Builders Workshop||8||Jul 24, 2012 11:49 AM|
|Discussion First Scale Build - What would you choose? UH-1B Build||bionicbone||Large Electric Helis||113||Jun 11, 2012 03:21 AM|
|Discussion First MD500/B400 scale build...actually first scale build of any kind.||Stephen Shioi||Mini Helis||21||May 03, 2008 05:53 AM|