|Sep 28, 2010, 10:49 PM|
For you outrunner guys...............Nick etc.......... Castle has a beefy looking 1800kv(the perfect 4s motor) for $40! Part of the big sale.......i bet a Castle Outrunner is Bad-A$$.........
|Sep 29, 2010, 03:18 AM|
Joined May 2004
I would be interested, but the UPS International shipping alone costs $98.87, so roughtly I'd buy three motors and receive one...
If anybody knows a (much) cheaper way to get one (or two) across the pond, please let me know.
|Dec 10, 2010, 12:40 AM|
Joined Dec 2004
Thanx to some digging and a lot of help from Steve (sgomes) the set for the C-455 X mount and the C-470 rotor end prop adapter for the 4200 series of motors from Heads Up RC are easily adapted. The x fits 2 of 4 holes and can be drilled / expanded to fit other 2. The rotor end prop takes a bit of work with a swiss pattern file and a drill press. I did a front prop adapter from a Rimfire, came out very crude looking and a lot of work. These Heads Up pieces are reasonably priced and shipping is very quick from Florida. Check out the solder jig, neat ,for under $20 shipped. Hope this helps someone!! John Sard with Thanx to (sgomes)
|Dec 10, 2010, 02:01 AM|
Yeah, mine came with mount and prop adapter. Just need 8 short M3 screws to mount them on.
With apc 15x8 and 4s-4000, the 34-24-750's max amp draw was 82 A and 165 oz of thrust, temp 120F (tested with larger ESC)
With apc 15x6 and 4s-4000, max amp draw was 67.5 A and 160 oz of thrust, temp 118 F (tested with larger ESC)
Better quality and runs much smoother than Rimfire motor.
The plot below was tested with ICE 50, so I set the current limiter at 70 A peak.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||NEW - WELGARD C/28/26/12 & C28/22/27 OUTRUNNERS $21 & $17 Shipped; BOTH $34 - NEW||old_dude||Aircraft - Electric - Power Systems (FS/W)||4||Aug 29, 2010 11:22 AM|
|Sold||5030/16 outrunners and Castle HV 85s from the SRT/10||lmopar69||Aircraft - Electric - Power Systems (FS/W)||4||Aug 29, 2009 08:30 PM|
|Question||Castle Phoenix ESC Settings for use with Hyperion Outrunners||Dynomike||Power Systems||1||Apr 13, 2007 11:41 PM|
|Question||Castle Phoenix ESC Settings for use with Hyperion Outrunners||Dynomike||Power Systems||0||Apr 07, 2007 06:00 PM|
|Known issues with Castle Creations ESCs and outrunners.||space_case||Electric Sailplanes||3||Sep 08, 2005 09:23 AM|