|Sep 01, 2012, 07:13 AM|
Joined Sep 2012
kk v5.5 blackboard preflight settings and calibration
This is my first post so please be a little understanding.
last night i finished building my first quadro (X configuration) with KK 5.5 blueboard (not from HK, but it is the same as i now), but i have a few problems with configuration. (i use Minsoo Kim firmware v2.5)
my propellers/motors arrangement:
1. left - top(front) - CW
2. right - top(front) - CCW
3. right - bottom(back) - CW
4. left - bottom(back) - CCW
is that correct?
after arming, throttle up, motors start together, but quad leans strongly to the left. i can correct it using Ail stick, but a little more throttle and quad begins to rotate to the left, and it is hard to correct all that issues using Tx only.
what am i doing wrong? what can i change/calibrate now?
ESC throttle calibration is ok.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Real issues with KK v5.5 blackboard and Xcopter setup with JR radio||chopperaddict||Multirotor Talk||1||May 23, 2012 04:16 AM|
|Discussion||Kk blackboard v5.5 help!||slakster||Multirotor Talk||1||Nov 04, 2011 10:36 AM|
|Discussion||Kk blackboard v5.5 help!||slakster||Multirotor Talk||7||Nov 04, 2011 02:21 AM|
|Sold||Snapquad XL frame + KK blackboard v5.5||Wing&aPrayer||Aircraft - Electric - Multirotor (FS/W)||1||Oct 24, 2011 09:40 PM|
|Discussion||Kk blackboard v5.5 help!||slakster||Multirotor Talk||1||Oct 24, 2011 05:46 PM|