HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jul 17, 2014, 08:26 PM
Registered User
Joined Nov 2013
25 Posts
Discussion
Aerobalsa blade sizes

We are about to go 'whole hog' on blade production but we don't really know what modelers want. We can produce rotor blades that are 1-1/2", 2", 2-3/8", and 2-3/4" wide by any length up to 36" long.

For example: even though we have 2" x 36" blades in stock, it makes sense to me that a more practical length for a 2" wide blade would be 18" long. The 36" long blade would be practical in a 2-3/4" wide blade. For reference both the Scout and MKII blades are 2-3/8" x 17-1/2" so I can see that a 2-3/8" x 18" blade might be desirable. Naturally an 18" blade is going to be less expensive than a 24" blade.

If anyone feels inclined to respond to this post on blade sizes you would like to have available please let us know. Primarily the 2", 2-3/8", and 2-3/4" wide sizes for now. We have a pretty good supply of 1-1/2" x 18" blades right now so they would be on the back burner.

Feed back appreciated.
Mark
www.flyingbalsa.com
www.aerobalsa.com
flyingbalsa1@gmail.com
goodeye is online now Find More Posts by goodeye
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Aerobalsa blades goodeye Auto Gyros 6 May 25, 2014 11:20 AM
Discussion Aerobalsa blade finish JochenK Auto Gyros 6 May 30, 2007 03:13 PM
Discussion New DC - Downthrust on Aerobalsa Blades Gyroguru Auto Gyros 6 Aug 20, 2006 06:43 PM
G3p0-Aerobalsa rotor blade help-Mickey dougmontgomery Auto Gyros 4 Nov 09, 2005 10:24 AM
Bolt Hole Location on Aerobalsa SG6042 blades? Gyroguru Auto Gyros 7 Aug 30, 2005 08:19 PM