hi,
ive got a problem with my hexa ... the light which shows that the motors are armed just blinks but i cant arm the motors. the gui isnt showing anything... as if the model wanst there

any ideas `?

PROBLEM SOLVED ... broken connection to the wm+ and a problem with the com port on the computer

man, you scare me twice a day
But i am releafed, you got your formula one car working, nice.
The octo seems to be pretty stable you fly.

Originally Posted by Goofy23

i am curently working on it, one good news, i will support also a european GPS module avaiable here from germany.
...

Are there different GPS modules for different countries? Can I use FMP04-TLP GPS module in germany?

i was scared too...
today is a presentation at our flying field and i wanted to do some aerobatics with the hexa ( we even bought smoke so it looks like an aerobatics plane ^^)

Originally Posted by warthox

the mwc board from flyduino.com equipped with wmp; ready for flying
i love the color

Well done warthox (and Paul)
By the way: what kind of tape do you use for GYRO mounting (WM+)? I'm using the microbeast pads from freakware and would like to have a cheaper alternative.

aBUGSworstnightmare

Originally Posted by aBUGSnightmare

Well done warthox (and Paul)
By the way: what kind of tape do you use for GYRO mounting (WM+)? I'm using the microbeast pads from freakware and would like to have a cheaper alternative.

aBUGSworstnightmare

thanks
sorry i dont have the packing any more. so i cant tell u the right description atm.
its mirrortape from 'tesa'. 3 layers are perfect.

heres the finished quad with the mwc board and centerplates from paul.
will test the new mwc fw 1.8 with it.

Originally Posted by warthox

heres the finished quad with the mwc board and centerplates from paul.
will test the new mwc fw 1.8 with it.

It's a very clean built.
I'm thinking about this center plate for my next proto.
I notice you didn't use the power distribution directly on the PCB.
Is there a reason for this ?

I think you could save a little bit the build time by avoiding one hole under the motor axis, and cut instead the unused part of the axis with a dremel. (and save something like 5g )

It's possible with Multiwii_1.7 or Multiwii_1.8 stabilize the CAM PITCH and CAM ROLL and at same time control the CAM Pitch or Roll with a potentiometer on my TX for find a correct angle of view?

Originally Posted by jonnypaletta

It's possible with Multiwii_1.7 or Multiwii_1.8 stabilize the CAM PITCH and CAM ROLL and at same time control the CAM Pitch or Roll with a potentiometer on my TX for find a correct angle of view?

Hi,

yes, it's possible with V1.8. You need to uncomment the SERVO_TILT which is in config.h.

change:

/* The following lines apply only for a pitch/roll tilt stabilization system
   On promini board, it is not compatible with config with 6 motors or more
   Uncomment the first line to activate it */
//#define SERVO_TILT
..

to:

/* The following lines apply only for a pitch/roll tilt stabilization system
   On promini board, it is not compatible with config with 6 motors or more
   Uncomment the first line to activate it */
#define SERVO_TILT
..

Be shure you have enough channels on your TX!

Rgds
aBUGSworstnightmare

I also dont know why he didnt used the onboard distri.
Alex i will send you a set, no prob, will be glad to see it in your hands.

Hi, I'm using the flyduino warthox board and I don't get any reading from the wmp and nunchuk. Maybe I wired it wrong. Can someone help me please?
Infos:
MultiWii_1.8 code with changed flight mode -> HEX6X
No others changes.

on the pics from warthox you should be able to see how it should be.
Your WMP looks correct, you may should try with the WMP only first and its may a good idea to connect your acc directly to the I2C line as its possible now.

Originally Posted by aBUGSnightmare

Hi,

yes, it's possible with V1.8. You need to uncomment the SERVO_TILT which is in config.h.

change:

/* The following lines apply only for a pitch/roll tilt stabilization system
   On promini board, it is not compatible with config with 6 motors or more
   Uncomment the first line to activate it */
//#define SERVO_TILT
..

to:

/* The following lines apply only for a pitch/roll tilt stabilization system
   On promini board, it is not compatible with config with 6 motors or more
   Uncomment the first line to activate it */
#define SERVO_TILT
..

Be shure you have enough channels on your TX!

Rgds
aBUGSworstnightmare

I have ch7 and ch8 empty on my RX, how i must connect ex. ch7 on Flyduino for control CAM TILT with a potentiometer on my TX?

Originally Posted by Goofy23

on the pics from warthox you should be able to see how it should be.
Your WMP looks correct, you may should try with the WMP only first and its may a good idea to connect your acc directly to the I2C line as its possible now.

I did connect the WMP first and after no readings I added the nunchuk. I double checked the wires and checked the connection of the wires from the WMP to the board.