Stryker control loss at speed????
OK I built a stryker from spare parts I purchased from Horizon Hobby.
I didn't want the stock paint job and I put in my own electronics.
With my latest setup every thing works fine except when I am firewalled straight and level the controls are ineffective…
It’s not radio loss because when I slow down I have control again.
And the control comes back proportionally with airspeed reduction.
I found this out by pointing it straight up, full throttle and it does stay in control.
Two things I suspect, elevon flex, but there stiff??
Or servo stall
Would love for another opinion, or confirmation
Here is the setup
DX7 for control
2 HS 56 servosWrong they are hs82
Of course it's HK stuff
Turnigy 2836 Brushless EDF Motor 3200kv
70 amp speed control (a little over kill)
3amp turnigy BEC
4 cell 35c 2200 mah battery
APC 5 x5 prop.
Runs exceptionally cool…and fast
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Contest||2010 Flat Foam Speed Challenge: Top speed is JIMBAKER at 91.0 mph||The Don||Foamies (Scratchbuilt)||986||Jan 23, 2011 12:23 PM|
|Help!||Loss of throttle control....1%stick acts like 100%||TN_heli_pilot||Mini Helis||3||Jan 25, 2010 07:12 PM|
|Discussion||Possible causes for sudden loss of control...||cjmdjm||Electric Plane Talk||8||Jan 13, 2010 07:16 PM|
|Speed control for Stryker F-27||johnnyrotor||Power Systems||1||Mar 31, 2005 12:22 AM|
|loss of tail control at high throttle||rcworm||Micro Helis||10||Jan 16, 2005 11:47 PM|