|Sep 09, 2012, 06:57 PM|
Had an old ESC burn up on me
Built a Tuffwing quick with an old 25amp ESC i bought back in 2006. the motor was a EMAX CF2822 & 5x7 prop . Was flying around for about 4 minutes when she rolled inverted and burned in from 100ft , I lost all control .. when i picked up the wing I could smell the esc. I did cut off the bullet connectors and soldered the wires straight to the motor. Did I do something wrong? I didn't notice anything funky when i ran it on the bench.
|Sep 10, 2012, 11:43 AM|
It is hard to say what it could be...
Looks liken there is no ventilation for the ESC... What temps was the ESC running at? I would be concerned about temps. Did you loose servo power also?
You can use the online repair form to send in the ESC...
|Sep 10, 2012, 01:57 PM|
Not worth it to me to send it in for repair , nothing I'm flying these days would use a 25amp esc. Probably pick up one of the newer 40amps y'all are putting out.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||Help! Burn the Flysky 9x radio, and now shows me 1.1V on the screen||Mc.Daniel||Radios||11||Oct 19, 2013 03:04 AM|
|Question||Is there an easy way to test whether ESC or motor is burned out?||demuddy||Beginner Training Area (Aircraft-Electric)||4||Feb 29, 2012 02:52 AM|
|Discussion||Burned up an ESC, question||airbagit13||Electric Plane Talk||11||Jul 31, 2010 10:57 PM|
|Wanted||looking for old broken or burned up BL motors or escs||MATTS650||Aircraft - Electric - Power Systems (FS/W)||1||Jan 19, 2009 01:33 PM|
|Why would an ESC burn up with power but no signal?||roccobro||Power Systems||25||Jun 30, 2006 01:06 PM|