SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
This thread is privately moderated by JimStanmore, who may elect to delete unwanted replies.
Old Nov 18, 2012, 08:46 AM
Changing one life at a time...
JimStanmore's Avatar
United States, NJ, Pemberton Township
Joined Aug 2010
419 Posts
Trader Rating: 125
Found
>>FOUND<< 3.3v BEC/UBEC Wanted >>FOUND<<

I am looking for a 3.3v BEC/UBEC along the lines of the AEO 3.3V 3A UBEC. I am going to use it to power a DSM2 module in a Th9x. Don't need the connectors because I have to solder all of the wires anyway. Before sending the money to HP, I thought I would see if someone in the community could use it first.

If you have one lying around that you can let go, post or pm what and how much.

Thanks!

>> FOUND <<
JimStanmore is offline Find More Posts by JimStanmore
RCG Plus Member
Last edited by JimStanmore; Nov 18, 2012 at 12:31 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 18, 2012, 12:13 PM
r/c addict
USA, LA, DeRidder
Joined Jul 2004
202 Posts
Trader Rating: 144
would this maybe work
http://www.rcgroups.com/forums/showthread.php?t=1771914
nitrodude71 is offline Find More Posts by nitrodude71
Reply With Quote
Old Nov 18, 2012, 12:27 PM
Changing one life at a time...
JimStanmore's Avatar
United States, NJ, Pemberton Township
Joined Aug 2010
419 Posts
Trader Rating: 125
Thanks nitrodude71, the only thing wrong with that is my application needs 3.3v out and that provides 5.8v or 5.1v.

I am going to be using a DX5e DSM2 transmitter module mounted in a regular 9x module. The module from the cheapie BNF controllers may work with the 3.3 off of the 9x board, but the DX4/5e module may draw too much power and cause brownout resetting. I have an LM317 and the components to make a voltage regulator, but a BEC/EBEC is a simpler and cleaner installation.

You have to er9x flashed on your radio; it not only changes the channel order to match DSM2, it also has the code to send out DSM2 compatible signals. I used a cheap USB programmer at first and then s_mack gave me a Smartie parts board (thanks again!!!) and that makes life a whole lot easier.

http://www.hacksmods.com/2011/12/spe...e-from-hp6dsm/
http://9xforums.com/wiki/index.php/H...e_DSM_protocol
http://www.rcgroups.com/forums/showthread.php?t=1691703
JimStanmore is offline Find More Posts by JimStanmore
RCG Plus Member
Last edited by JimStanmore; Nov 18, 2012 at 01:40 PM.
Reply With Quote
Old Nov 18, 2012, 12:30 PM
Changing one life at a time...
JimStanmore's Avatar
United States, NJ, Pemberton Township
Joined Aug 2010
419 Posts
Trader Rating: 125
>> Found << one through the Aircraft - General - Radio Equipment (FS/W) thread.
JimStanmore is offline Find More Posts by JimStanmore
RCG Plus Member
Latest blog entry: Plans On My Build List
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! HK OSD not working with 3.3v Camera Firepower FPV Talk 0 Sep 02, 2012 02:51 AM
Wanted 3.3v usb>ftdi programming card jy0933 Aircraft - Electric - Multirotor (FS/W) 4 Jul 20, 2012 10:51 PM
Discussion Who Makes/Sells Quality/Reliable BEC's/UBEC's? itsme2 Power Systems 5 Mar 17, 2012 11:27 AM
Discussion Hobbyking 3.3v 3amp ubec aeromaniac Radios 4 Dec 25, 2011 08:40 PM
Question Spectrum AR7000 on 3.3v BEC? Oreo Radios 3 Apr 25, 2007 02:07 AM