|Jun 05, 2008, 05:45 PM|
Joined Feb 2004
Simple wall charger for NiMh Rx pack??
Hello. I need some advice. Who sells as simple wall charger that will charge a 4 cell 4.8v 2200mah NiMh pack for my Receiver. Just like the ones that come with a radio system... but that will charge a NiMh battery.
|Jun 06, 2008, 12:02 AM|
Joined Oct 2004
The wall charger that came with your transmitter will charge a NiMH receiver pack just fine. It will simply take quite a bit longer than charging a NiCd receiver pack. Assuming your transmitter wall charger has about 50mA current available on the 4.8V port, simply plug it in and let it charge for a few days. NiMH cells can safely be slow charged indefinitely provided the charge current is less than 1/10C with little to no risk of overcharging.
I've been using NiMH packs in my transmitters for years and have always used the supplied charger that came with the TX. All of the packs are still performing brilliantly.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold Like new Futaba Wall charger for TX/RX||Twmaster||Aircraft - General - Radio Equipment (FS/W)||2||Sep 02, 2006 07:48 PM|
|Finding a Charger for NiMh 5-pack cells||jwyman||Batteries and Chargers||2||Aug 31, 2004 01:15 PM|
|12v wall charger for NiMh Pack||Cerberus||Power Systems||2||Dec 02, 2003 03:57 AM|
|HT Wall Charger for Nimh Conditioning||hweird||Hitec/Multiplex USA||1||Aug 04, 2003 02:38 PM|
|FS: Hitec CG-25A Wall charger for TX and RX||Nik-rc||Aircraft - Electric - Airplanes (FS/W)||0||Jul 13, 2003 07:06 PM|