|Dec 01, 2013, 08:46 AM|
United States, NJ, Frenchtown
Joined Mar 2003
1 of 2 Guanli PBYs is finished.
Pulled everything out except the foam & pushrods to the tail surfaces.
Used some Hyperion 12 mm inrunners. 5980 KV with 11.17 to 1 gearboxes and APC E 8 X 8" props.
battery is a 3 cell 1800 mahr. 2 BP Hobbie 30 amp. ESCs
HS-55s R & E only.
Weight RTF 29 oz..............thrust is 14 oz static. & about 38 mph Computer duration is 32 minutes. Total amps are 7.0
These are all indoor testing results.Amps volts rpms .
I connected a 14 vdc car battery to the ESCs to simulate a 4 cell pack. Almost pulls out of my hand vertically. I do have to speed up a little slower to save the tiny plastic gear teeth in the large plastic gear.
Finished up all the ding & repainting repairs. I like the light weight & duration.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||DJI Phantom 1.2 vs 1.1.1||motosyndicate||Multirotor Talk||24||Mar 25, 2014 11:05 PM|
|Discussion||Guan Li PBY||cyclops2||Waterplanes||0||Nov 20, 2013 12:21 PM|
|Discussion||Finishing a Foam Plane with Fiberglass, Finishing Resin, Eze-kote, WBPU?||torquenut||Scale ARF/RTF||4||Nov 16, 2013 09:21 PM|
|Question||Guanli Focke Wulf (Help needed)||Krayola||Power Systems||9||Oct 09, 2013 04:48 PM|