|Dec 08, 2006, 09:17 PM|
Stall Speed Indicator Feature from Eagle Tree Systems, LLC
Why risk your multi-thousand investment on a bad landing?
Eagle Tree Systems is pleased to announce the release of the variable beep rate Stall Speed indicator feature for our Seagull Pro telemetry systems. This feature is ideal for jets and other planes that are stall-prone during landing.
To use the Stall Speed feature, just install our latest software from the support page of our website, read the instructions on setting stall speed, configure the stall speed trigger, and you are ready to go! Once configured, the Seagull Wireless Dashboard will begin a slow beep when the trigger speed is reached, and will begin beeping more rapidly as your speed decreases, helping you to maintain correct speed during landing.
If you don't yet have our Seagull Pro telemetry system, see your dealer, or order directly from us if there is not a dealer near you. We now have support for wireless display and alarms for key Jet ECU parameters from JetCat, AMT and Fadec based turbines!
And as always, phone and email Technical Support from Eagle Tree is free and unlimited.
See your Dealer, visit our site at http://www.eagletreesystems.com or email firstname.lastname@example.org for more information.
|Jun 29, 2009, 07:02 PM|
Just a suggestion, as you now sell the stand-alone altimeter/airspeed indicators, I think that a stand-alone stall indicator would be fairly easy to implement by using most of the firmware/hardware of the airspeed indicator.
add a pushbutton to program the stall speed in conjunction with the seven segment LED, add a FET to act as a switch to an external light (a Luxeon Flash would be ideal here), some changes to the firmware and voila, a 'stand-alone' stall indicator. Would save me the trouble of building my own!
of course, if there is enough programming space left, there is no reason why both the airspeed and the stall speed features could not be incorporated in the same package.
|Oct 13, 2011, 07:09 AM|
I feel ripped-off.
|Oct 20, 2011, 05:33 PM|
FWIW, I set up a stall speed warning on my Seagull Pro in the following fashion:
In my sailplane I carefully entered stalls as if I were landing with plenty of altitude to recover. I performed this a number of times heading upwind, downwind, turning, etc.
I then down loaded the data and compared the air speed to the sudden altitude drops. These corellated easily and I took an average of the speeds and set my speed alarm about 2-3 MPH higher that where the plane appeared to stall. It works fine for me. I use this technique in my "high end" (multi thousand $) scale ships.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Stall Speed Indicator Feature from Eagle Tree Systems, LLC||billpa||Fuel Jet Talk||5||Jan 29, 2007 02:13 PM|
|Discussion||Stall Speed Indicator Feature from Eagle Tree Systems, LLC||billpa||Electric Ducted Fan Jet Talk||2||Dec 09, 2006 07:20 AM|
|New Product||Jet ECU Real-time Data from Eagle Tree Systems, LLC||Dave Lauck||Product Announcements||0||Mar 24, 2006 12:48 PM|
|MicroPower E-Logger from Eagle Tree Systems, LLC||Dave Lauck||Product Announcements||0||Dec 19, 2005 04:15 PM|
|Multiple RPM Sensor Support from Eagle Tree Systems, LLC||Dave Lauck||Product Announcements||1||Nov 09, 2005 01:39 AM|