Joined Feb 2004
Information for each coordinate with google earth..
Since a week i am using a Eagletree V4 logger with a airspeed sensor and a 10Hz GPS.
Everything is working flawlessy straight out the box.
The reason I bought it was because I want to compare the data from different setups on the same airframe.
The google earth function is very nice but there is only one thing that is not clear to me:
I would really love to see the information from each coordinate. The amps i'm using, the airspeed etc. I can press "play" in the eagletree program, and I see my parameters running, but I would love to see my flight path, next to the parameters.
Something like this:
Is this possible, and if yes, How?
I really apreciate any help, I would be thankfull.
Sorry for the delay! It is recommended to open a support ticket for a specific technical question directed to our support department. Currently there isn't an option as you have described. If you open a support ticket we can ask our engineer team if there is something similar in the works.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Airliner tracking with Google Earth (live)||CrashingDutchman||Electric Plane Talk||20||Oct 29, 2006 01:29 PM|
|Link||Flight simulator with google earth||treehog||Simulators||0||Oct 12, 2006 02:10 PM|
|Discussion||Altitude with Google earth?||bob loblaw||Aerial Photography||5||Feb 24, 2006 09:21 PM|
|Discussion||Fun with Google Earth||BuzzBomber||Aerial Photography||5||Feb 18, 2006 12:16 PM|