Exceed RC Brushless Rocket Series Motors (3 min 12 sec)

Check out the New Brushless Rocket Series Motors by Exceed RC available at hobbypartz.com. For any questions or comments please leave a comment in the comment box below.

Check out the Rocket Series at: http://www.hobbypartz.com/rocket.html

I have a Rocket series 86MB26 that needs a new Spinner Pack.
No Spinner Packs are listed on HobbyPartz for this series.
Is there one for the Alpha or Monster Power that will fit?

I ordered the 86MA09-2215-920Kv "Rocket" motors from Hobbypartz and the specifications given on the web page are wrong/misleading. I wrote to your support email address, but neither have I received a reply, nor have you accurately corrected the specifications.

Inaccuracies:
[1] Number of Cells (lipo) 4; Max Voltage 11.1V :: 11.1V indicates a max of 3 Lipos.
[2] Max efficiency current 6-12A; Watts: 260 :: 12*11.1 = 132 watts, not 260.
[3] Weight: 105g -- this since corrected to "gross weight". The actual weight is "net weight", now listed as 60g but not shown when I ordered the motor.
[4] Look at the specs for 86MB23-Rocket-2814-840kv. This motor has almost twice the weight (115g) and is listed as 300 watts. I doubt very much that the 86MA09-2215-920Kv, which is much smaller would be 260 watts.

Originally Posted by hobbypartz

http://www.youtube.com/watch?v=PcmcqRKHlcA

Check out the New Brushless Rocket Series Motors by Exceed RC available at hobbypartz.com. For any questions or comments please leave a comment in the comment box below.

Check out the Rocket Series at: http://www.hobbypartz.com/rocket.html

I've received the following rocket motor from HobbyPartz and need the prop adapter, what part do I need to order???
I pointed the part I need on the picture.


Item#: 86MB22-Rocket-2814-1035kv

If you can give me your order number for the motor I can try to order the prop adapter for you zeeker78.

-Charlie

Originally Posted by RaidenCharlie

If you can give me your order number for the motor I can try to order the prop adapter for you zeeker78.

-Charlie

Charlie, I don't have an order number, I got two hobbypartz rocket series motors from a friend with no prop adapters.
The Item#: 86MB22-Rocket-2814-1035kv
I'm willing to buy a few of them but I need some help finding the right part to fit the motor.

Originally Posted by zeeker78

Charlie, I don't have an order number, I got two hobbypartz rocket series motors from a friend with no prop adapters.
The Item#: 86MB22-Rocket-2814-1035kv
I'm willing to buy a few of them but I need some help finding the right part to fit the motor.

If they can't get you the prop adapter for that motor. Is the shaft on it reversable to where you can use a collet style adapter? Can always do that as a last resort if you cant get one.

Zeeker78, have you ordered from us before? If you have all I need is any order number so I can note into so the part can be located. I'm not too sure if the shaft is reverse able, you might need to PM Nitro Technicians and ask them if you can.

-Charlie

Deleted and posted in main forum

Originally Posted by RaidenCharlie

Zeeker78, have you ordered from us before? If you have all I need is any order number so I can note into so the part can be located. I'm not too sure if the shaft is reverse able, you might need to PM Nitro Technicians and ask them if you can.

-Charlie

Charlie, no I have not ordered from you guys, it is why I mentioned the motor information, once you can tell me a part number or accessories (prop adapters) I need I will be able to place an order.