|Oct 11, 2012, 12:26 PM|
CellPro 10XP gets really warm on discharge
Well since I didn't get an answer in the existing 10XP thread, I'll start a new one.
Here's the basic question from that thread:
"Well I'd vote for the higher storage charge voltage since that's what I'm used to seeing with my Muti 4S on the smaller LiPo's but I just got into bigger electric powered stuff and bought two 10XP chargers. Trying to set a new pair of TP five cell 5000mah packs wired in series to the storage voltage the charger got pretty warm doing a discharge from 3.85 volts before I shut it off besides the time required and never did get to the 3.79 volts. How warm is this thing supposed to get on a discharge?"
I could have set something wrong but I just used the "storage charge" option and it went into a discharge mode. The case got warm enough you didn't want to grab the thing.....
|Oct 11, 2012, 03:16 PM|
"The case got warm enough you didn't want to grab the thing"
That sounds too warm. Are you sure the fan is operational? Please contact email@example.com so you can discuss how to proceed.
|Oct 12, 2012, 12:04 PM|
I'll go check it again but IIRC the fan was operational. I'll also check the manual, software setting and my wiring setup to make sure it's correct before I contact Howard.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion MPA Cellpro 10XP||Jeanskydive||Batteries and Chargers||0||Jun 14, 2012 11:49 PM|
|For Sale Cellpro 10xp||j35u5fr34k||Aircraft - Electric - Batteries & Chargers (FS/W)||4||Jun 04, 2012 11:09 AM|
|Sold Cellpro 10XP||priscalex||Aircraft - Electric - Batteries & Chargers (FS/W)||2||May 17, 2012 10:31 AM|
|Sold Excellent condition Cellpro 10XP, 15A, 600W 10s Multi-Chemistry Charger||Gixxy||Aircraft - Electric - Batteries & Chargers (FS/W)||1||Mar 22, 2012 03:46 PM|
|Discussion Cellpro 10XP Dual Port Multi Chem 600W Charger/Discharger||JimHSoars||Batteries and Chargers||6||Aug 08, 2011 10:43 AM|