New Products Flash Sale
Thread Tools
Old Jan 27, 2014, 12:51 PM
SimonChambers is offline
Find More Posts by SimonChambers
Radio? Screwdriver!
United Kingdom, England, Bristol
Joined Aug 2011
1,013 Posts
New Product
FS58U - Opensource/DIY Fatshark 32Ch 5.8GHz Rx Module for BOSCAM/HK/RV/imersionRC/etc

FS58U - Opensource/DIY Fatshark 32Ch 5.8GHz Rx Module for BOSCAM/HK/RV/immersionRC/etc

Module available to buy here - https://shop.fizzjelly.com/product&product_id=63

The FS58-U is a 5.8GHz Video Receiver module that is designed as a perfect upgrade to the Video Receiver in your FatShark Goggles. Designed to be universally compatible with the vast majority of 5.8GHz Video Transmitters, its open source design allows it to be future compatible with the latest devices. So whether you use BOSCAM, Foxtech, HobbyKing, ImmersionRC or another brand, you can view the video feed just using a pair of goggles - no extra ground station is needed.

Unlike other similar products, you don’t need physical access to the module to change the band. Simply pass a magnet over the module and the integrated buzzer and LED will indicate the new frequency band. To change channels in the band, simply use the standard FatShark channel change buttons – again the integrated buzzer and LED will confirm exactly which channel you are on. If you prefer, you can still use the button on the module to switch bands.

Specification
  • 32 channels – future firmware upgradable when new 5.8Ghz Video Transmitters are released.
  • Universally compatible with most 5.8GHz video transmitters – such as BOSCAM, Foxtech, HobbyKing, ImmersionRC, RangeVideo, TBS and others.
    -90dBm Receiver Sensitivity.
  • SMA antenna connector – compatible with your existing FatShark antennas. RP-SMA adapter optional.
  • 8 channels split into 4 frequency bands. Frequency Band can be changed either by swiping a magnet (when goggles are on), or by pushing the button.
  • Channels can be changed by using the FatShark channel buttons.
  • Compatible with the following FatShark goggles without soldering: FatShark Dominator & FatShark Predator v1
  • The following goggles are compatible but may require desoldering of the old module: FatShark Predator v2 & FatShark Attitude
  • Older generation of FatShark goggles, such as the RCV922 will require more extensive modification to work this module.

Currently Supported Frequencies
  • Band 1 (BOSCAM A): 5865MHz, 5845MHz, 5825MHz, 5805MHz, 5785MHz, 5765MHz, 5745MHz, 5725MHz
  • Band 2 (BOSCAM B): 5733MHz, 5752MHz, 5771MHz, 5790MHz, 5809MHz, 5828MHz, 5847MHz, 5866MHz
  • Band 3 (BOSCAM E): 5707MHz, 5685MHz, 5665MHz, 5645MHz, 5885MHz, 5905MHz, 5925MHz, 5945MHz
  • Band 4 (Airwave): 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz, 5880MHz

Note: Even though Airwave is supported, the video image quality may not be exactly the same as a dedicated Airwave module.



--------------------------------------------------------------------------------------------------------------------------------

How it all started:

Hi all,

TL;DR (Too Long; Didn't Read): A 5.8GHz 32 channel receiver module that fits into the Fatshark Dominator/Predators/others. Much like the TBS 5.8GHz Dominator Rx module - but with the ability to change the band with a magnet (no need to make a hole in the plastic or open them up) and as its Open Sourced - it's possible to retune it for any new 5.8GHz systems that come out! If you're interested in one, let me know below as I can knock a few to sell.


I'm relatively new to FPV (been flying regular LOS club flying for quite a while now though) and I managed to score a pair of hardly used FatShark Predators V1 with a bunch of ImmersionRC video transmitters off a fellow flying club member who didn't get on with FPV. However the quality of the video quality was poor and the range was rubbish. After Googling around a bit, it turns out that some of the supplied modules are dodgy and the older version wasn't that sensitive. Also I found out that tthere are two main 5.8GHz systems not compatible with each other- Airwave (used in immersionRC/Fatshark) and SkyRF (BOSCAM/TBS/RangeVideo/pretty much everything else).

After a bit more Googling to try and solve my problem I found that there are these main options:
  1. Buy a Boscam RC832 32channel 5.8GHz receiver and strap it to your head.
  2. Buy a new version 5.8GHz Fatshark module and only use the expensive Fatshark and ImmersionRC video transmitters.
  3. Buy a Team Black Sheep 5.8GHz Dominator Rx module.

Well I didn't like any of those options! The first is uncomfortable and looks stupid (we all have to look good - even when under goggles ). On the second I didn't want to spend $70 for video tx when I could get others that work just as well for $27. Plus I gave up waiting for the replacement Fatshark module on HobbyKing to come off backorder...

So that left the final option. However the TBS module is expensive and the only way to change the band is by pushing the button. On my Predators, the module is built into the goggles (i.e. have to pull it apart to gain access) and I didn't want to make a hole my shiny new goggles. Also there is only a LED for feedback on what channel your on (impossible to see in the daylight).

Anyhow I thought I could do better, so I did this little project...


Well ok, it's not the most visually exciting of FPV projects...

By designing it myself it gives me the chance to add a magnetic sensor, so you can change band by simply passing a magnet (e.g. a canopy hatch) over the side of the goggles when they're on. The buzzer then gives a nice loud beep to let you know what band you're on (1beep=A, 2beeps=B, 3beeps=E and 4beeps=Airwave frequencies). Also unlike some of the crappy looking RF connectors that some FPV stuff uses, I've spec'ed an expensive but genuine Emerson RF SMA connector (meets the ratings of MIL-STD-202)! The RF connector is an important part of an RF system, so it really pays to buy a decent quality branded connector - the cheap may work ok to start off with, but once you've disconnected and reconnected a couple of times, it'll go loose.

I've tested it on the bench and it works fine with 2 different Boscam 5.8GHz video transmitters - One set to the default Band E and the other set to Band A (used by TeamBlackSheep/RangeVideo/others). The next steps are to do a flying test and make sure everything works as it should be.

I plan to fully open source it, so others can build one, retune or reuse if they so wish. For example, the channel lines on this module could be reused as a I2C/SPI/etc interface so that the bands are changed digitally in some project. Just before I do that, I need to flight test it and make sure everything is working as it should be (but the weather here is against me at the moment)!

If anyone is interested in buying one, let me know here as if there is sufficient interest, I may knock a small handful up to sell (probably will be around the $40 to $50 mark).

Cheers,
Si.
SimonChambers is offline Find More Posts by SimonChambers
RCG Plus Member
Last edited by SimonChambers; Jan 21, 2015 at 02:35 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 27, 2014, 12:52 PM
SimonChambers is offline
Find More Posts by SimonChambers
Radio? Screwdriver!
United Kingdom, England, Bristol
Joined Aug 2011
1,013 Posts
Firmware and Schematic can be found on GitHub - https://github.com/simonchambers/fs-5.8g-vrx

Requires AVR-GCC tool chain. Run make all to build and make program to program using USBasp programmer.

Released under a MIT licence - about as Open Source as you can get!
SimonChambers is offline Find More Posts by SimonChambers
RCG Plus Member
Last edited by SimonChambers; Mar 28, 2014 at 06:43 PM.
Reply With Quote
Old Jan 27, 2014, 01:09 PM
Shikra is offline
Find More Posts by Shikra
SILURIA / UK
Shikra's Avatar
United Kingdom
Joined Jun 2009
2,473 Posts
Cool job!
Shikra is offline Find More Posts by Shikra
Reply With Quote
Old Jan 27, 2014, 05:05 PM
SimonChambers is offline
Find More Posts by SimonChambers
Radio? Screwdriver!
United Kingdom, England, Bristol
Joined Aug 2011
1,013 Posts
Quote:
Originally Posted by Shikra View Post
Cool job!
Cheers!

If I remember correctly I think you sent me the RTC6715 datasheet. If so thanks!

Si.
SimonChambers is offline Find More Posts by SimonChambers
RCG Plus Member
Reply With Quote
Old Jan 28, 2014, 09:10 AM
alexedit is offline
Find More Posts by alexedit
Registered User
alexedit's Avatar
United States, FL, Miami
Joined Dec 2008
1,198 Posts
Bravo!
alexedit is offline Find More Posts by alexedit
RCG Plus Member
Reply With Quote
Old Jan 28, 2014, 11:57 AM
bipsiler is offline
Find More Posts by bipsiler
Registered User
Joined Nov 2012
32 Posts
Thanks Simon.

There is an Atmega IC in your schematic, do we need a firmware or something for it?
bipsiler is offline Find More Posts by bipsiler
Reply With Quote
Old Jan 28, 2014, 04:18 PM
Shikra is offline
Find More Posts by Shikra
SILURIA / UK
Shikra's Avatar
United Kingdom
Joined Jun 2009
2,473 Posts
Quote:
Originally Posted by SimonChambers View Post
Cheers!

If I remember correctly I think you sent me the RTC6715 datasheet. If so thanks!

Si.
Yep that was me. Glad to see it went to good use

BTW - I'm in Chepstow.... can almost see you from here! Must hook up for a flight
Shikra is offline Find More Posts by Shikra
Reply With Quote
Old Jan 30, 2014, 04:19 AM
PetoK is offline
Find More Posts by PetoK
Registered User
Slovakia, Bratislava Region, Bratislava
Joined Jan 2012
9 Posts
Hello Simon
I would like to ask you from where did you buy Rx module? I'm trying to find place where I could buy module for A band. I've found some sites but they have not so clear info and I'm not sure if I've got a right module from them.
Thanks
PetoK is offline Find More Posts by PetoK
Reply With Quote
Old Jan 30, 2014, 08:25 AM
SimonChambers is offline
Find More Posts by SimonChambers
Radio? Screwdriver!
United Kingdom, England, Bristol
Joined Aug 2011
1,013 Posts
Quote:
Originally Posted by bipsiler View Post
Thanks Simon.

There is an Atmega IC in your schematic, do we need a firmware or something for it?
Yea, I'm just reading through licences to work out what to put it under and then I'll upload everything to GitHub for all. It's a bit of nightmare going through the many open source licences and working out what is what.

If anyone has any suggestions on a licence, I'm all ears!

Quote:
Originally Posted by Shikra View Post
Yep that was me. Glad to see it went to good use

BTW - I'm in Chepstow.... can almost see you from here! Must hook up for a flight
Cool! I'll have to dig out my passport.
SimonChambers is offline Find More Posts by SimonChambers
RCG Plus Member
Reply With Quote
Old Jan 30, 2014, 08:37 AM
SimonChambers is offline
Find More Posts by SimonChambers
Radio? Screwdriver!
United Kingdom, England, Bristol
Joined Aug 2011
1,013 Posts
Quote:
Originally Posted by PetoK View Post
Hello Simon
I would like to ask you from where did you buy Rx module? I'm trying to find place where I could buy module for A band. I've found some sites but they have not so clear info and I'm not sure if I've got a right module from them.
Thanks
Hi PetoK,

Which module are you looking at? Tx or Rx?

In my Boscam 200mW TX module, I removed the lid of the and just shorted Pin 4 (BX) coming out of the RTC6705 (the main RF ic) and shorted Pin 3 (S). See this post here.

Again similar can be done on the Rx module.

The other way is to buy the Boscam 32CH Tx/Rx - more expensive but no soldering required. This can do Band A, B, E and Airwave frequencies.

Cheers,
Si.
SimonChambers is offline Find More Posts by SimonChambers
RCG Plus Member
Reply With Quote
Old Jan 30, 2014, 11:50 AM
Mochaboy is offline
Find More Posts by Mochaboy
Radd Graduate '06
Mochaboy's Avatar
United States, MA, Sudbury
Joined Aug 2006
1,842 Posts
ummm

wow
Mochaboy is offline Find More Posts by Mochaboy
Reply With Quote
Old Jan 31, 2014, 03:04 AM
PetoK is offline
Find More Posts by PetoK
Registered User
Slovakia, Bratislava Region, Bratislava
Joined Jan 2012
9 Posts
Quote:
Originally Posted by SimonChambers View Post
Hi PetoK,

Which module are you looking at? Tx or Rx?

In my Boscam 200mW TX module, I removed the lid of the and just shorted Pin 4 (BX) coming out of the RTC6705 (the main RF ic) and shorted Pin 3 (S). See this post here.

Again similar can be done on the Rx module.

The other way is to buy the Boscam 32CH Tx/Rx - more expensive but no soldering required. This can do Band A, B, E and Airwave frequencies.

Cheers,
Si.
I'm looking for RX module band A , but now I understand I can modify the module for the band A if I did not find one which is band A ... but I have to solder little bit.
Thank You.

Peter
PetoK is offline Find More Posts by PetoK
Reply With Quote
Old Feb 02, 2014, 12:07 PM
arjankooger is offline
Find More Posts by arjankooger
Registered User
Texel , the Netherlands
Joined May 2007
29 Posts
Hello,

im also interested to buy 1, for my old Rc992 goggles (2.4 Ghz). i did build a cheap chinees 5.8 Ghz RX in it,next to my original Rx, so i can use both, but i have more transmitters, on different 5.8 bands, so this would solve the problem, as long as i can use it stand alone, coz im not sure it will fit in place of my original 2,4 Ghz rx, inside my first generation Fatshark.

Thanks.
arjankooger is offline Find More Posts by arjankooger
Last edited by arjankooger; Feb 03, 2014 at 03:44 AM.
Reply With Quote
Old Mar 14, 2014, 04:24 AM
geebles is online now
Find More Posts by geebles
Registered User
United Kingdom, England, Bristol
Joined Oct 2012
284 Posts
Hi, I really like your design! One question tho, how are you actually changing the bands? From your schematics the RX module only has 3 channel lines (3x from fatshark into attiny, and then 3x out of attiny to the rx module).. what sort of magic is going on here?! :P

Regards Giles
geebles is online now Find More Posts by geebles
Reply With Quote
Old Mar 14, 2014, 08:32 AM
DTF UHF is online now
Find More Posts by DTF UHF
Registered User
DTF UHF's Avatar
Canada, QC, Montreal
Joined May 2013
487 Posts
Quote:
Originally Posted by geebles View Post
Hi, I really like your design! One question tho, how are you actually changing the bands? From your schematics the RX module only has 3 channel lines (3x from fatshark into attiny, and then 3x out of attiny to the rx module).. what sort of magic is going on here?! :P

Regards Giles
If you open the cover on the RX and bust off a specific resistor, you enable SPI mode on the receiver's chip, so you can program the frequency with an external microprocessor. Same with the transmitter modules.
DTF UHF is online now Find More Posts by DTF UHF
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted wanted 5.8ghz tx rx for fatshark/ immersionrc fpv Tonygsxr624 FPV Equipment (FS/W) 3 May 13, 2014 06:24 AM
Sold RV Diversity Board, #16 HD KeyChain Camera, Immersion (fatshark RX 5.8ghz module) crd FPV Equipment (FS/W) 5 Nov 03, 2012 06:00 PM
Sold ImmersionRC 600mw 5.8GHz VTX and Fatshark Dominator/Predator RX module CorporalB FPV Equipment (FS/W) 5 Nov 02, 2012 02:41 PM
Sold immersionRc 5.8Ghz 600mW and 5.8Ghz FatShark Module + CP Antenna's Jessestr FPV Equipment (FS/W) 1 Sep 04, 2012 04:04 PM
Sold Fat Shark Dominators with 5.8Ghz ImmersionRc 600mW + 5.8Ghz Rx FS Module and CP Ant. Jessestr FPV Equipment (FS/W) 8 Sep 01, 2012 11:35 PM