|Aug 24, 2011, 10:28 AM|
SKYWALKER POWER-ELECTRONICS set up
There are so many questions and answers regarding power and electronics set up for Skywalker, we could group all the Skywalker set ups here in one thread.
Please post :
Weight of the finished plane
Motor (web links)
If possible power consumption @WOT/cruise
all additional electronics:
Long Range sys. video Frequency,etc.
OSD Filters, regulators and so on.
Hehe, pictures a big +
Strictly technical and specific stuff.
PLEASE POST ANY NOT RELATED QUESTION HERE:
OR HERE :
|Aug 24, 2011, 10:38 AM|
Joined Jan 2011
Weight of the finished plane: 2.0 kg
Motor (web links): Moxie 980 KV http://www.lowpricerc.com/product_in...roducts_id=991
Prop size: 9x6
ESC: Moxie V 40A
Servos used: HS65 HB
1 x 4s 5000 mah + 1 x 3s 1000 mah
FY21AP II + AP117 OSD
ReadyMadeRC FPV pod
ImmersionRC 5.8 VTx
|Aug 24, 2011, 11:21 AM|
Turnigy 3536 1400kv
Level flight 6amp
Flight ± slow climb 7amp
2x2200 3s +1000 3s
|Aug 24, 2011, 11:50 AM|
|Aug 24, 2011, 12:27 PM|
Don't forget what kind of battery you are using.
Not sure of weight, but mine is probably heavier than most.
Turnigy Plush 80 Amp (Way too big but it was on hand)
Moxie 980KV http://www.lowpricerc.com/product_in...roducts_id=991
9x6 prop (I've used APC slow fly and electric prop, can't tell difference)
4S 5000mAh for motor
I can launch easily at 20 Amps, cruise at around 4-5 Amps
Also of note. I've tried this setup with a 3S battery and it was kinda wimpy but my batteries were old and wimpy as well.
I have significant problems with my current setup and RVOSD vibrations. Looking to buy a better motor to help solve this and get back to a 3S setup.
|Aug 24, 2011, 03:38 PM|
K, here we go :
Hope didn't forget anything... :P
|Aug 24, 2011, 07:33 PM|
Joined Dec 2009
Motor: 980kv from BEVRC
Prop size: 9x6
ESC: 40a Turnigy
Battery: 4S 3000mah x 2
Current draw at level flight: about 3-4A in no wind conditions.
Hobbyking $16 camera with 2.8mm lens
Version #11 HD spycam
video Tx: FOX 800 with whip antenna and patch good for 10km+
|Aug 24, 2011, 08:53 PM|
format stolen from ecampos. :
|Aug 24, 2011, 10:30 PM|
|Aug 25, 2011, 01:49 AM|
Joined Apr 2010
Stole ecampos format aswell...
|Aug 26, 2011, 03:43 PM|
USA, NV, Las Vegas
Joined Apr 2006
Stole ecampos format as well...
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||flyfly power set up||ian.c||Electric Ducted Fan Jet Talk||3||Aug 20, 2011 09:33 PM|
|Discussion||STOL power set-up||moes||Power Systems||6||Aug 18, 2011 12:35 AM|
|Question||Easy glider power set-up||slowstick4ap||Power Systems||1||Jul 07, 2011 08:23 AM|
|Help!||GY401 SET-UP - DX7 - tail set up... help :(||d1cky_kds||Electric Heli Talk||16||Jun 27, 2011 07:10 PM|
|Discussion||My XP9303/DragonLink and Skywalker Set Up||Crist Rigotti||FPV Talk||6||Apr 03, 2011 12:50 AM|