|Jun 04, 2014, 01:31 PM|
My new little 310 for gopro 3 onboard.
310mm X diagonale
2x arms 10 x 10 x 260mm
1 center plate 7.5 x 0.5 x 260mm
4 nuts and bolts, 3M fiber glass reinforced tape, velcro and nylon clamps.
FC: CC3D + case:
Tx/Rx 2.4 mode PPM - satellite Spektrum
Motors: Sunnysky 2204 2300KV
ESC: Lumenier 12 amp ESC with SimonK Firmware (N-FET)
Props: HQ Prop 5x4
LiPo: nanotech 1A 25C for tests
FPV: gopro 3+, vTx vRx Lawmate 1.2
First tests last we, first crash (radio cut) = 1 prop, second = 2 props.
|Aug 19, 2014, 06:38 AM|
Germany, HB, Bremen
Joined Aug 2014
I'm new on the Forum
My last build, it is foldable (smaller backpack is enough). I used google SketchUp to plan it.
distance between motors: 250mm
Easier to see it with LEDs on it (cloudy days)
|Sep 11, 2014, 06:21 AM|
|Sep 17, 2014, 06:25 PM|
Joined Jun 2014
I heard that Graupner Elektro props are more or less perfect out the box though one look at the price will make you wonder if that's really worth it.
Anyway, as far as actually balancing them goes, I tried out laser prop balancing for the first time recently. It's fiddly, tedious and wasn't nearly as easy as a lot of the instructional videos seem to make it. Still, even though I struggled a little, I seen a massive improvement. Definitely recommend trying it out.
So here's a recent flight of my first decent H-quad, not counting the previous one that was pretty terrible and didn't last long before the first crash. I hadn't balanced up my props when I took this so I've disabled the sound to save your ears the strain.
I also had a problem with one of the motors so yaw control was sloppy. Very pleased with it though.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Steven Wang as our newest member of our GWS USA LLC.||GWS4CEO||GWS (Grand Wing Servo)||14||Jun 06, 2006 09:15 PM|
|E-Fli-owa check out our big event at our website!||Goneflyin||Electric Plane Talk||6||Sep 20, 2002 05:59 PM|
|E-Fli-owa check out our big event at our website!||Goneflyin||Parkflyers||1||Sep 19, 2002 09:42 AM|