|May 14, 2001, 07:49 PM|
How many amps on a S600?
Ok, here's the deal: Another club member of mine, after hearing me complain that I didn't have a plane that could handle any more wind than 5 or 6 mph (all I have is my trusty full fuse lite stik), he dedided to give me a PT-Electric that another club member had given him a while ago (w/o radio equipment, of course). So, for my current building project (a speed 400 super cub) I have a 555 reciever and 2 HS-81's lying around, and they don't look like they will be getting used for a while. So I now have a plane (w/ speed 600 motor), a reciever, and 2 servos! what is missing from this picture? A speed control, battery, and a charger. I'm just gonna use a tower 7 cell 1500 mAh car battery (nice and cheap, only $18), and a cheap hobbico timed charger. I'm not going high quality on this project, I just wanna spend a little bit to get this plane in the air. But my question is this: how many amps should the speed control be? I have an Electrifly c-5 in my lite stik, so I was looking at the c-30 (30 amps). It says that it can handle a speed 600, but I dunno. So, should a 30 amp speed control be sufficient, or should I buy something that can handle more amps?
|May 14, 2001, 08:00 PM|
Angola, IN USA
Joined Mar 2000
C-30 should be more than enough, as a S600 will burn up with more than 30 amps for any duration.
This application will draw less than that if you keep to an 8 or 8.5 in diameter prop
|May 14, 2001, 08:43 PM|
Central Lake, Mi. USA
Joined Jan 2001
Buy a Master Airscrew gearbox. 2.5:1 will be fine. Use a 10X7 prop(electric) use 8 to 10 cells, but keep it under 30 amps. This will provide a lot more power and flight time than direct drive. Good Luck !
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||razor 2500 in GWS EDF-64 = How many amps on 3S?||Fiasco||Power Systems||3||May 16, 2007 03:18 PM|
|Discussion||How many Amps on B50-8M / 5s Setup||f5b@wannabe||Hacker Brushless||13||Apr 16, 2007 06:21 AM|
|Charging batteries on how many amps?||larsen2000||Power Systems||2||Aug 22, 2004 02:10 PM|
|How many amps on EPS300C?||Dunqun||Batteries and Chargers||5||Sep 25, 2003 11:59 AM|
|How many amps with a kv 5000 motor, 4.7x4.7 prop on 6 cells?||KrisS||Power Systems||2||Dec 28, 2002 02:06 AM|