New Products Flash Sale
Thread Tools
Old May 23, 2015, 07:00 PM
420flyboy is online now
Find More Posts by 420flyboy
Mile High EDF
420flyboy's Avatar
United States, CO, Denver
Joined Jul 2011
1,097 Posts
Build Log
Black Horse Hobby Viperjet 1.4m 90mm

Finally managed to get a hobby store in Denmark to ship me this model from Black Horse Hobby .
90mm Viper Jet
Specifications:
Wing span: 1400
Total Length: 1350
Weight: 3700 g
Wing construction: CNC cut Balsa Ribs
 Fuselage construction: CNC cut Balsa Ribs Stabilizer/Fin construction:BalsaFinishings
(Fuselage): Covered with OracoverTMFinishing
(Wing): covered with OracoverTM
Ducted Fan: 90mm EDFMotor
(recommend): 8-Ch.Radio System
Receiver (recommend): 8-Ch. Receiver
Servo (recommend): 8 x Servos (29x13x30mm)
Battery (recommend): 8S LiPo 29,6V 5,000mAh.Battery

Comes with :
1 x Black Horse Viperjet 1400mm, 90mm EDF
All Pushrods,
Control Linkages, Hinges, Screws, Nuts and Bolts 
1 x noselanding gear with oleo struts
2 x main landing gears with oleo struts
1 x clear canopy
1 x decal set
1 x Manual

Figured I'd start a build log ...
should be here soon
http://hobbyfly.com/en/airplanes-par...0mm-14059.html

Ripmax - Black Horse Viper Jet MkII EDF ARTF (A-BH133) (2 min 59 sec)
420flyboy is online now Find More Posts by 420flyboy
Last edited by 420flyboy; May 23, 2015 at 09:09 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old May 23, 2015, 08:00 PM
Chris True is offline
Find More Posts by Chris True
Registered User
St. Mary, Maryland, United States
Joined Dec 1996
9,289 Posts
Look forward to it!
Chris True is offline Find More Posts by Chris True
Reply With Quote
Old May 23, 2015, 09:06 PM
420flyboy is online now
Find More Posts by 420flyboy
Mile High EDF
420flyboy's Avatar
United States, CO, Denver
Joined Jul 2011
1,097 Posts
Cool , thank you .
The Viperjet is one of my favorite jets and I have a collection of them , one foam , one fiberglass and now one from balsa with a nice oracoat covering . Looks to be the same manufacturer as the phoenix models preceptor 90mm that I have , and its a great looking plane , fast and well built .

Going to stay 8s for lightness , jetfan 90mm with 1600kv leopard motor and castle ice 100 , digital servos all around and Hobbyking $15 main retracts with there $8 nose retract. Also plan to add in lights in the wings , figure that it has spots for nav lights , so why not
420flyboy is online now Find More Posts by 420flyboy
Reply With Quote
Old May 23, 2015, 09:57 PM
Cosmo21 is offline
Find More Posts by Cosmo21
Lets burn
Australia, QLD, Kewarra Beach
Joined Apr 2006
244 Posts
Very very good little jet. Mine has many many enjoyable flights. Very light.
I also used 8s, it's the sweet spot, tried 10s, no good went back to 8s, 5ooomah packs 4.5 min flying at 102amps max.

Only 2 mods I did was to make a new mount to put batts further aft for cg, and reinforced the intakes with cf rovings.

About 125 mph straight and level, with gps.

Have fun

Matt
Cosmo21 is offline Find More Posts by Cosmo21
Reply With Quote
Old Yesterday, 03:24 AM
syche is online now
Find More Posts by syche
Registered User
Joined Nov 2014
6 Posts
Hello all.
I also ordered mine a few days ago for a light low amp 12s setup. I am using jepe's fan. I hope to start the built in 2 weeks.
I will be following this thread
syche is online now Find More Posts by syche
Reply With Quote
Old Yesterday, 06:02 AM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
EDF Jet Jam 2015, May 28-31st
Robert Belluomini's Avatar
United States, KY, Crestview Hills
Joined Dec 2000
7,220 Posts
Available here with low cost shipping

http://shop.lindinger.at/product_inf...cts_id=9704783
Robert Belluomini is online now Find More Posts by Robert Belluomini
Reply With Quote
Old Yesterday, 07:05 AM
420flyboy is online now
Find More Posts by 420flyboy
Mile High EDF
420flyboy's Avatar
United States, CO, Denver
Joined Jul 2011
1,097 Posts
Picked mine up for less than there shipped price to usa , still a good deal though , I emailed them to make sure they ship to usa , some sites will let you check out and then within a week or so they will say it cant be mailed .
420flyboy is online now Find More Posts by 420flyboy
Reply With Quote
Old Yesterday, 09:51 AM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
EDF Jet Jam 2015, May 28-31st
Robert Belluomini's Avatar
United States, KY, Crestview Hills
Joined Dec 2000
7,220 Posts
Cool, the price shown has VAT tax so it's actually 21% cheaper for us cust. Shipping is just 20 euros best part is they are good to deal with.
Robert Belluomini is online now Find More Posts by Robert Belluomini
Reply With Quote
Old Yesterday, 11:03 AM
syche is online now
Find More Posts by syche
Registered User
Joined Nov 2014
6 Posts
I ordered mine there. http://www.brigitte-ritter.de/xtcomm...MkII-ARTF.html. but no idea if they ship to the US.
It is the cheapest place i could fins in europe
syche is online now Find More Posts by syche
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product TAFT Hobby VIPERJET 90mm EDF JET! Extreme_RC Extreme RC AUSTRALIA 14 Apr 16, 2015 06:27 PM
Sold Taft Hobby ViperJet PNP 90mm EDF jsbaugh Aircraft - Electric - Jets (FS/W) 9 Jul 28, 2014 02:55 PM
Sold 90mm EDF ViperJet Hobby King Fiberglass Red7fifty Aircraft - Electric - Jets (FS/W) 4 May 29, 2014 12:16 AM
Sold Hobby King Composite 90mm ViperJet Sovrin Aircraft - Electric - Jets (FS/W) 5 Dec 11, 2013 11:56 AM
Discussion Hobby King 90mm Viperjet RC Man Electric Ducted Fan Jet Talk 1 Sep 07, 2013 06:56 AM