SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
Old Jul 09, 2013, 10:39 AM
Champagne Supernova
FlyHighSelllow's Avatar
United States, FL, Orlando
Joined Jul 2010
1,936 Posts
Discussion
Music Wire strut steerable C Clip

Does anybody have a better method than to add a C clip near the bottomw of the music wire to keep the 3mm music wire strut from falling into the retract besides trying to cut a groove into the wire with a dremel disk and then using a C clip ?

Are there other options Im missing ?
FlyHighSelllow is online now Find More Posts by FlyHighSelllow
Reply With Quote
Sign up now
to remove ads between posts
Old Jul 09, 2013, 07:06 PM
Registered User
Wintr's Avatar
USA, MO, Florissant
Joined Nov 2010
1,686 Posts
On the wheel side of the retract? If so, a wheel collar will do. If you mean, inside the retract, there isn't much room for anything but a clip.
Wintr is online now Find More Posts by Wintr
Reply With Quote
Old Jul 09, 2013, 07:36 PM
Champagne Supernova
FlyHighSelllow's Avatar
United States, FL, Orlando
Joined Jul 2010
1,936 Posts
Quote:
Originally Posted by Wintr View Post
On the wheel side of the retract? If so, a wheel collar will do. If you mean, inside the retract, there isn't much room for anything but a clip.
Inside the retract other side of the trunion. Pita.
FlyHighSelllow is online now Find More Posts by FlyHighSelllow
Reply With Quote
Old Jul 10, 2013, 09:46 AM
Registered User
Wintr's Avatar
USA, MO, Florissant
Joined Nov 2010
1,686 Posts
Yeah, big PITA. While the wire was still straight, I chucked it into a drill, put the drill in a bench vise, then set it turning. Then, I gently touched my Dremel cut-off wheel against it, to carve the groove. After that, I bent the wire to form the axle.
Wintr is online now Find More Posts by Wintr
Reply With Quote
Old Jul 10, 2013, 10:16 AM
Champagne Supernova
FlyHighSelllow's Avatar
United States, FL, Orlando
Joined Jul 2010
1,936 Posts
Quote:
Originally Posted by Wintr View Post
Yeah, big PITA. While the wire was still straight, I chucked it into a drill, put the drill in a bench vise, then set it turning. Then, I gently touched my Dremel cut-off wheel against it, to carve the groove. After that, I bent the wire to form the axle.
Yeh I did something similar with my dremel in the vise. I ended up with a crude groove but I put a clip on it this morning to test and it looks like it may work, maybe a dab of epoxy too.
FlyHighSelllow is online now Find More Posts by FlyHighSelllow
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Front steerable strut, possibly robart, new martys40s@verizo Aircraft - General - Miscellaneous (FS/W) 4 Apr 28, 2013 07:33 AM
Discussion Aerial clips used in music video Hellsiege Aerial Photography 2 Mar 29, 2013 10:05 PM
Question Soldering Brass Tube / music wire mag1 The Builders Workshop 4 Feb 12, 2013 11:24 AM
Discussion Music wire question btown2 Foamies (Scratchbuilt) 13 Jan 20, 2013 11:40 AM
Help! Robart Strut Music Wire Problems dawhale Flight Accessories 13 Mar 14, 2012 05:01 AM